Description
Products: I. V. Solution Administration Sets.
Consist of:
1. Piercing device--Made of medical grade white ABS, with or without air
Inlet, 3 or 4 holes size according to ISO8536-4 standard.
2. Protective cap--Made of PP or PE.
3. Drip chamber--Made of soft PVC, size according to ISO8536-4
Standards, 4.5cm--7cm in length.
4. Fluid filter--Support is made of ABS or PE, nylon net, mesh size: 15 micron.
5. Air inlet--Cap is made of red, white, or blue PP
6. Water-repellent filter-PP support, hydrophobic filtering paper, made of
Acrylic resin and nylon.
7. Flow regulator--Made of PP or ABS, normal shape, small size or horned
Shape, large size.
8. Injection site--Latex cone, rubber cone, synthetic rubber cone, Y site-
Made of hard transparent PVC+injection site made of natural or synthetic
Rubber.
9. Soft tubing--Made of soft medical grade PVC, diameter 3x4mm,
150cm in length, or adjust according to requirements...
10. Terminal connector: Made of PE, PVC, luer lock or luer slip.
11. Components assembly: By gluing with solvent cyclohexanone
Specification:
They are suited to hard containers and soft bags( without air inlet type)
Sterile, non-toxic, pyrogen free, sterilized by EOG.
Packing:
1pc/blister package 20pcs/mid. PE bag, 20 bags/ctn carton size changes according to the specific volume of products. (volume is up to Chamber size, tube length, different components)
1pc/polybag (HDPE, LDPE, compound film), 20pcs/mid. PE bag, 20bags/ctn, carton size changes according to the specific volume of Products.
Remark: You can also give us your specific requirements to confirm the products you need finally.
Product Description| Product Name | Medical and Disposable Hypodermic IV Infusion Set |
| Tube Length | 150 cm |
| Drop Type | 20 Drops/ML |
| Material | Medical Grade PVC/PP/PE/ABS, Rubber, SUS |
| Sterile | Sterilized by EO Gas, Non-toxic, Non-pyrogenic |
| Certificate | CE, ISO, FDA |
| Lifespan | Disposable and Valid for 3 Years |
| Inner Packing | PE or Blister Packing, 400 Pcs in Large Carton |
| Drip Chamber | PVC, Sizes According to the ISO Standards |
| Vented Spike | ABS |
| Flow Regulator | ABS or PP |
| Flexible Soft Tube | PVC, 1.5m Soft and Kink Resistant |
| Protective Cap | PP or PE, For Closure Piercing Device with Internal Thread That Prevents the Bacteria From Coming in |
| Air Inlet | PE (With or Without) |
| Fluid Filter | PVC (With or Without) |
| "Y" Injection Port | PVC (With or Without) |
| Injection Site | Rubber (With or Without) |
| Sharp Needle | Stainless Steel (With or Without), Hypodermic Needle or Butterfly Type Needle Available |
| 1. The Luer Slip Tip or Luer Lock Tip(See the Difference Below.) |
| 2. With or without needle |
| 3. The PE or Blister Bag Packing |
Complaint
