Description
XT8022 Semi-automatic strapping machine-high table Adjustable
Strapping machine(semi-automatic/semi-auto): The high and the low model can be changed. If you change the high table into low table, you just move the strap plate from the interior of the machine to the right-hand side of the machine, and replace the 4short legs and the brake lever. Reverse the above procedures, you can change the low table into high table.
Features:
A. The high and the low model can be changed. If you change the high table into low table, you just move the strap plate from the interior of the machine to the right-hand side of the machine, and replace the 4short legs and the brake lever. Reverse the above procedures, you can change the low table into high table.
B. The height of the machine can be adjusted according to the height of the operator and the working demands.
* If the working ground is not level, you can adjust the length of the 4 legs then keep the machine level.
C. Other features are as that of the semi-automatic strapping machine.
Specification
Power supply: 220V/110V/50Hz/1-phase
Power: 0.66KW
Maxi shrinking force: 60kg
PP tape width: 6-15mm
Min, strapping article: 60mm
Max, strapping article: No limit
Strapping speed: 1.5second/strap
PP tape paper core£ : 200mm/230mm/280mm
Options
A. Mechanical tension or Electronical tension is optional
B. Any color is available
C. Outside tension arm or inside tension arm is optional
D. Temperature control outside or inside the control box
E. Adjustable guide size
F. Safety stop switch
Semi-automatic strapping machine
Mechanical clutch or Electric tension detector
Open cabinate
Tension range:15-45kg
Core size:200mm
Strap width:9.12.15mm
strap thickness:0.6, 0.8,1.0mm
Power:220v 50hz 1phase
Category Name | Subcategory Name | Active | TNT Length | TNT Width | TNT Height | TNT Weight |
Strapping machine | Semi-automatic | 1 | 895 | 565 | 720-870 | 85 |