Hall Effect Sensor (AH3621) , Unipolar Sensor, Hall IC, Positon Sensor, Speed Sesor, CMOS Process

Min.Order: 500
Product origin: Nanjing, Jiangsu, China
Infringement complaint: complaintComplaint
US$ 0.1

Description
Features 

Rated working voltage 2.5 V ~ 12 V, the limit voltages as low as 3.0 V;
Operating temperature range: -25ºC ~ 85ºC;
Rated output current(sink) : 10 mA, the maximum output current(sink): 20 mA
Switch response time is about 1μs, the operating frequency DC ~ 100 kHz;
Small temperature drift between operating point and release point;
No mechanical contact, no spark, switch signal stability, no shaking moment, high reliability and safety;
Products meet the EU RoHS instruction 2011/65 / EU and REACH regulations 1907/2006 / EU requirements


When the "S" pole of magnet faces the mark surface of the sensor and is closed to sensor(B ≥ Bop),the sensor outputs low level; When the magnet is far away from the sensor(B≤ BRP), the sensor outputs high level. When the "N" pole faces to sensor's mark surface of sesor, the sensor is no response. Stable hysteresis (BH= ∣BOP- BRP∣) ensures stable switch status of sensor. The magnet and electric transfer characteristic curve of AH3621 is shown as the figure:

Hall sensor AH3621 is a kind of digital output Hall IC which produced by CMOS Technology. The sensor chip is produced by CMOS technology, it owns low power consumption, and it has built-in reverse voltage protection, voltage regulators, temperature compensation circuit, Hall-voltage generator, signal amplifier, Schmitt trigger, and output driver and other circuit unit etc. Excellent voltage regulator and temperature compensation circuit ensure the sensor stable operates over a wide voltage range and temperature range, and the reverse voltage protection circuit avoids the sensor to be damaged by reverse voltage.


Limit Parameter
ParametersymbolMin.Max.Unit
Storage Temp.Ts-2585ºC
Supply VoltageVCC216V
Output Cut-off VoltageVO(off)-12V
Magnetic InductionBunlimitedunlimitedmT
Output CurrentIO-20mA
 
Electrostatic Grade
Under human being mode, the Electrostatic compression is large than ±2kV.

 
Operating Condition
ParameterSymbolMin.Max.Unit
Supply VoltageVCC2.512V
Operating Temp.Ta-2585ºC
Output CurrentIO-8mA
 
Electrical Characteristc
ParamaterSymbolTest ConditionTyp.MaxUnit
Output Low LevelVOLVCC1=4.5, VCC2=12V, IO=25mA,BBOP0.20.4V
Output High LevelVOHVCC1=4.5, VCC2=12V, IO=25mA,B≤BRP11.512V
Output Leakage CurrentIOHVCC2=24V,VCC1 open circuit0.110μA
Supply CurrentICCVCC1=24V,Vo open circuit3.58mA
Output Rise Edge TimetRVCC1=VCC2=12V,
RL=1.2kΩ,   CL=20pF
125150μs
Output Fall Edge TimetF6080μs
 

Magnetic Characteristic
Test condition:VCC1 = VCC2 =24V,IO = 50mA
Parameter SymbolMin.Typ.Max.
Operate PointBOP-812
Release PointBRP34.5-
Hysteresis
Operate point-Release point
BH
BOP-BRP
358
 
 
Note 1: Unit is mT, 1mT=10Gs
Note2:  When the "S" Pole of the magnetic field is vertical to the front mark of product, we call the magnetic field B>0.
    Product Tag:
    Related categories:
    Scroll to Top