Steel Fiber-Steel Fiber-Glued Steel Fiber-Hook End Steel Fiber-Waved Steel Fiber-Stainless Steel Fiber

Shenzhen Chinary had focused dirmeter from 0.12 to 1mm cold draw carbon steel fiber, cutting steel fiber, melt-extracted steel fiber and stainless steel fiber since Oct 2001. Our users and customers think steel fibers as the partner of the most reliable and cost-effective concrete reinforcement because of being following advantages:
Save money and time while construction
Work safely with stable quality
Widely be recommended in bridge, concrete pipes, foundation slabs, industrial and market floors, manhole covers, mine roof support, pre cast for tunnel linings, pre cast walls, reinforcement of refractory materials, roads, runways, sidewalk slabs, shotcreting of tunnels, slope stabilization, taxiways and various other concrete applications

Commodity	Type	Diameter mm	Length mm	L/D	Cross Section	T. S. min. N/mm2
Hooked-End Steel Fiber (loose)	HF05025	0.50	25	50	round	1100-1800
	HF05030	0.50	30	60
	HF05530	0.55	30	55
	HF05535	0.55	35	65
	HF06025	0.60	25	40
	HF06030	0.60	30	50
	HF06035	0.60	35	60
	HF07535	0.75	35	50
	HF07540	0.75	40	55
	HF07550	0.75	50	65
	HF07580	0.75	60	80
	HF09050	0.90	50	55
	HF09060	0.90	60	65
	HF10050	1.0	50	50
	HF10060	1.0	60	60
Glued Steel Fiber	GS80/60	0.75	60	80	round	1100-1500
	GS85/50	0.60	50	85
	GS60/35	0.60	35	60
	GS65/35	0.55	35	65
Corrugated Steel Fiber	WF05020	0.50	20	40	round	1100-1800
	WF05030	0.50	30	60
	WF05530	0.55	30	55
	CF05535	0.55	35	64
	CF06030	0.60	30	50
	CF07530	0.75	30	40
	CF07535	0.75	32	43
	CF09050	0.90	50	56
	CF10050	1.0	50	50
Dumbbell Steel Fiber	DS	1/1.2 x 0.55	32/35	-	rectangle	700
Crimp Steel Fiber	CS	0.4-0.8 x 2-2.6	38/50	-	rectangle	750
Packing	in compound kraft paper bags with inner two in one film bags of 10/20/25Kg net each, 500/1000/1200Kg on pallets
Remarks	1. Most of Steel Fibres conform to ASTM A820 TYPE I standard & CE Certificate EN 14889-1:2006 2. We supply Steel Fibre & Stainless Steel Fibre (1.4301/AISI 304, 1.4841/AISI 314, 1.4845/AISI 310S, 1.4765, 1.4401/AISI 316 etc) according to the buyer's requirements (I.E. length, diameter, width, thickness, higher tensile strength I.E. min 1100-2400 N/mm2 or MPa)