Description
UPS: Low frequence online UPS
Input: 380Vac, 3phase
Output: 380Vac, 3phase
Capacity: 6kVA to 250kVA UPS
Isolation: Built-In Isolation Transformer
UPS features:
(1) High Performance System
(2) On-Line Double Conversion Topology
(3) True Sine Wave output
(4) Microprocessor Controller
(5) AVR Design, Expand Input Voltage Range(160 Vac~300 Vac)
(6) Inverter Design Using IGBT Module
(7) Well Protection
(8) Lightning and Spike Protection
(9) Electro Magnetic/Radio Frequency Interface(EMI/RFI) Filter Protection
(11) Outstanding Overload Capacity (Maintenance Up to 30 Seconds of 150% Overload)
(12) LED and LCD Display UPS Status and Internal Messages
Smart Computer Interface(RS232 Standard)
(13) Remote Monitoring, Control and Schedule Switch On/Power Down Capable
(14) Optional Series
External Battery Packs Can Extend Discharge Time From 0.5~2 Hours
Long Backup Series Contain 10A High Capacity Charger an Up to 8 Hours of Discharge Time
EPO(Emergency Power Off)
Auto By Pass Switch/Manual By Pass Switch
| MPT6KVA~50KVA |
| Mode | MPT6K | MPT10K | MPT15K | MPT20K | MPT30K | MPT40K | MPT50K |
| Capacity (VA/W) | 6K/4.8K | 10K/8K | 15K/12K | 20K/16K | 30K/24K | 40K/32K | 50K/40K |
| Battery voltage (V) | 384 |
| Overall efficiency | ≥91% |
| Noise | ≤53dB (distance 1m) | ≤56B (distance 1m) |
| Size: W×D×H(mm) | 550×600×1135 | 650×700×1510 |
| Weight (Kg) | 260 | 280 | 310 | 340 | 480 | 520 | 560 |
| (w/o battery) |
| MPT 60KVA~250KVA |
| Mode | MPT60K | MPT80K | MPT100K | MPT120K | MPT150K | MPT200K | MPT250K |
| Capacity (VA/W) | 60K/48K | 80K/64K | 100K/80K | 120K/96K | 150K/120K | 200K/160K | 250K/200K |
| Battery voltage(V) | 384 | 480 |
| Overall efficiency | ≥93% | ≥94% |
| Noise | ≤60dB (distance 1m) | ≤65B (distance 1m) |
| Size: W×D×H(mm) | 1250×750×1600 | 1600×750×1600 |
| Weight (Kg) | 580 | 780 | 860 | 980 | 1250 | 1600 | 1800 |
| (w/o battery) |
| Common parameter |
| Input | Voltage | Three phase with four line+ground wire, 380V±25% |
| Frequency | 50Hz±10% |
| Power factor | ≥0.92 |
| Output | Voltage regulation | Three-phase four-wire system, 380V±1% |
| Frequency regulation | 50Hz±0.05%(battery mode) |
| Wave form | True sine wave |
| Harmonic distortion | <3% (linear load), <5%( non-linear load) |
| Unbalanced voltage | Balanced load≤1%, unbalanced load≤3% |
| Phase displacement angle | Balanced load≤1º, unbalanced load≤3º |
| Transient response | ≤3% (load change: 0~50%~100%) and recovery time ≤10ms |
| Overload | 110%≥20min; 150%≥20s |
| Crest ratio | 5:01 |
| Transfer time | 0ms |
| Efficiency | Input AC to output AC | ≥95% |
| Indicator | LCD | Input voltage, output voltage, frequency, battery voltage, output power (%) |
| LED | BLV LED (battery low voltage) |
| Battery | Battery type | Lead-acid sealed, maintenance-free |
| Charging method | PWM constant current and constant voltage, battery intelligent management system |
| Charging time (standard type) | 12 hours |
| System performance | MTBF | 300,000 hours |
| Environment | temperature-10º~50º, humidity 0~93% without condensation, altitude ≤3000m |
| Support software interface | Novell Net Ware Windows9X Windows2000 Windows NT Linux |
| Other | Dustproof and moisture proof, inverter isolating transformer, thunderbolt surging wave absorption, and manual bypass switch |
Complaint
