Description
EPDM Foam(Closed Cell): 110-150kgs/m3
EPDM Foam(Open Cell): 95-100kgs/m3 General Characteristics of EPDM Sponge Sheet:
1. Closed cell structure making it impermeable to air and water and therefore an ideal material for sealing against air and/or water.
2. Outstanding aging properties and will not go brittle over time.
3. Very durable and relatively cheap.
4. Available in a wide range - high temperature, hard, soft, supersoft.
5. Good UV resistance.
6. Good mechanical properties.
7. Wide temperature range.
EPDM sponge sheet has superb air tight and water tight properties. Our EPDM foam sheeting is generally used within the automotive, electronic and construction trades. It is also a very good material for jointing expansion, weather strips, glazing seals and closure seals as well as being used for shock and noise absorbers and deadening. Its properties also make it suitable for requirements including thermal insulation on items such as garage door seals.
| Nos | property | Units | Tech requirments | Test Result | Test Method |
| 1 | tensile strength | Mpa | / | 0.44 | GB/T 6344-1996 |
| 2 | Elongation | % | / | 316 | GB/T 6344-1996 |
| 3 | Compression set | % | / | / | GB/T 6669-2001 |
| 4 | 23 Cx72hX25% |
| / | 73.4 | / |
| 5 | 70 CX24hX25% |
| / | 124.1 | / |
| 6 | Hot air aging (70Cx70h) after |
| / | / | GB/T3512-2001 |
| 7 | Tensile Strength rate | % | / | 22.7 | GB/T 6344-1996 |
| 8 | Elongation rate of change | % | / | 3.5 | GB/T 6344-1996 |
| 9 | Low temperature bend
(-40CX24H,180-degree bend sight) |
| / | No cracks | ASTM-D1050-2008 |
| 10 | Heat shrinkage
(90 degrees feeding x1H) after | % | / | 0.8 | GB/T 3512-2000 |
| 11 | Density | G/CM3 | / | 0.13 | GB/T 6343-1995 |
Topsun, the Professional supplier for the Foams for the large used for Construction/Bluiding, Marine, Automotive, Insulation, Packing, Shoes and Footwear, Sport/GYM Production....
Any other details, pls connect with us freely, Warmly Welcome and Servcie for you in 24HRS...
topsunfoam.en.made-in-china.com
Complaint
