Closed Cell EPDM Foam with Adhesive for Automotive

Min.Order: 1

Product origin: Changzhou, Jiangsu, China

Infringement complaint:

Complaint

US$ 0.01 ~ 1

Description

EPDM Foam(Closed Cell): 110-150kgs/m3
EPDM Foam(Open Cell): 95-100kgs/m3

General Characteristics of EPDM Sponge Sheet:

1. Closed cell structure making it impermeable to air and water and therefore an ideal material for sealing against air and/or water.

2. Outstanding aging properties and will not go brittle over time.

3. Very durable and relatively cheap.

4. Available in a wide range - high temperature, hard, soft, supersoft.

5. Good UV resistance.

6. Good mechanical properties.

7. Wide temperature range.

Nos	property	Units	Tech requirments	Test Result	Test Method
1	tensile strength	Mpa	/	0.44	GB/T 6344-1996
2	Elongation	%	/	316	GB/T 6344-1996
3	Compression set	%	/	/	GB/T 6669-2001
4	23 Cx72hX25%		/	73.4	/
5	70 CX24hX25%		/	124.1	/
6	Hot air aging (70Cx70h) after		/	/	GB/T3512-2001
7	Tensile Strength rate	%	/	22.7	GB/T 6344-1996
8	Elongation rate of change	%	/	3.5	GB/T 6344-1996
9	Low temperature bend (-40CX24H,180-degree bend sight)		/	No cracks	ASTM-D1050-2008
10	Heat shrinkage (90 degrees feeding x1H) after	%	/	0.8	GB/T 3512-2000
11	Density	G/CM3	/	0.13	GB/T 6343-1995

Topsun, the Professional supplier for the Foams for the large used for Construction/Bluiding, Marine, Automotive, Insulation, Packing, Shoes and Footwear, Sport/GYM Production....

Any other details, pls connect with us freely, Warmly Welcome and Servcie for you in 24HRS...

topsunfoam.en.made-in-china.com

Forward

Related products