Main Characteristics of injection PA6 pulley
1.Good wear-resistance
2.Good corrosion-resistance
3.High self-lubrication
4.High vibration-absorption
5.High noise-absorption
The property of injection PA6 pulley:
Property | Item No. | Unit | MC Nylon (Natural) | Oil Nylon+Carbon (Black) | Oil Nylon (Green) | MC90 (Blue) | MCNylon+MSO2 (Light Black) | |
Mechanical Properties | 1 | Density | g/cm3 | 1.15 | 1.15 | 1.135 | 1.15 | 1.16 |
2 | Water absorption (23ºC in air) | % | 1.8-2.0 | 1.8-2.0 | 2 | 2.3 | 2.4 | |
3 | Tensile strength | MPa | 89 | 75.3 | 70 | 81 | 78 | |
4 | Tensile strain at break | % | 29 | 22.7 | 25 | 35 | 25 | |
5 | Compressive stress (at 2%nominal strain) | MPa | 51 | 51 | 43 | 47 | 49 | |
6 | Charpy impact strength (unnotched) | KJ/m2 | No brak | No break | ≥50 | No BK | No break | |
7 | Charpy impact strength (notched) | KJ/m2 | ≥5.7 | ≥6.4 | 4 | 3.5 | 3.5 | |
8 | Tensile modulus of elasticity | MPa | 3190 | 3130 | 3000 | 3200 | 3300 | |
9 | Ball indentation hardness | N/mm2 | 164 | 150 | 145 | 160 | 160 | |
10 | Rockwell hardness | - | M88 | M87 | M82 | M85 | M84 |
Our Service:
1. Rich industry experience since 1988.
2. Wide arrange product line, including plastics sheet/rod/parts/accessories: MC NYLON, OIL NYLON, POM, UHMW-PE, PU, PETP, PC, PTFE, PVDF, PPS, PEEK, PAI, PI, PBI ect.
3. Manufacture, design and processing service as per your demand