Tractor Mounted Rotary Disc Mower and Grass Cutter

Disc mower, can be used to harvest the pasture,herbage,such as alfalfa,ryegrass,oat grass and so on., with high efficiency, are more suitable for cutting more taller crop. The cutter arbor stalled with the spiral hand shank, easily to go up and down, use two springs to hang, can adapt to the situation of the ground which is concave-convex, and doesn't destroy the grass ground.
The machine also with safe installations, when working, the mowing plate can moving back when meet the barrier, can protect the machine
1.  The disc mower cuts through heavy, high crops without wrapping or plugging, as well as for light thin grass. It is suitable for native grass, alfalfa, corn and other stalks.
2.  The mower can be raised quickly for turning or transport without adjusting the 3 point hitch.
3.  Suitable for wide range terrains and contours, even uneven and rocky ground.
4.  More efficient than reciprocating mowers
 

Model	Cutting width	Disc Qty	Disc Speed	Disc Dia.	Speed(km/hour)	Matched power	PTO	Weight
MS1670	1.67m	4	2900	500mm	4-12KM	35-55hp	Cat1-2	436kg
MS2050	2.05m	5	2900	500mm	4-12KM	40-65hp	Cat1-2	487kg
MS2450	2.45m	6	2900	500mm	4-12KM	50-70hp	Cat2	590kg
MS2860	2.86m	7	2900	500mm	4-12KM	55-70hp	Cat2	629kg
MS3200	3.2m	8	2900	500mm	4-12KM	60-90hp	Cat2	707kg

Main features

1. It is mainly used for the harvesting of all kinds of herbage.

2.  The hay mower is attached to the rear suspension of the tractor and use the PTO to work.

3.  The machine has 2 - 8 pieces high-speed rotating knife plates, with two blades on each blade, and the high-speed operation reaches 1-2 hectares per hour, the productivity is very high.

4.  The rotation of knife plates is driven by the gear drive instead of the traditional belt transmission,which makes the job more stable, the failure rate is low and the maintenance cost is low.

5.  use of spring suspension and the rotation of the belt, the knife beam is low, easy to rise and fall, which can be cut with the ground, the cutting stubble is low, and the surface has good imitation ability.

6.  The blades can be punched back to avoid damage

7.     The lawn mower relies on the rotating force of the turntable to concentrate the grass in the middle position for easy collection.

 

Advantage

1. Disc mower with different discs, also with various of cutting width, from 1.3m-2.55m, cutting grasses into 2-6 lines.

2. Disc mower widely used in large pastures, usually cut grass, hay, alfalfa, corn stalk, etc.

3. Disc mower cuts through heavy, high crops without wrapping or plugging, as well as for light thin grass.

4. Disc mower can be raised quickly for turning or transport without adjusting the 3 point hitch.

5.Disc mower suitable for wide range terrains and contours, even uneven and rocky ground.

QC Flow:
1. Material inspection before production to avoid any potential problem from  the very beginning.
2. Inspection for half-finished products during order production to find the problem earlier if any;
3. Inspection for finished products after production to make sure the       products comply with customer's requirement.
 
Department Introduction of QC / Technical Support:
In order to get super quality, we have special QC department to control the  product quality. This department is composed by experienced engineers who can offer us strong technical support easily. The engineers will inspect     product quality both in order production and after order production to make sure each shipment we send to our customers is in the best status.  With their strict quality control, our consistent quality wins us more and more orders  from our international customers.

Full Service and Product Warranty: 
We offer our customers technical assistance and a full one year warranty on all products covering all manufacturing defects. ME Our manufacturing facility is completely computerized to provide our customers efficiency, reliability, high quality and timely shipments. Spare Parts:We can supply spare parts within 15 business days or sooner. Currently, part numbers are not available on-line. You may however determine the part number from your Parts Book or, if it is a simple part,  you may describe the part and send us an order online. If you are not sure, please Contact Us . Shipment: We can ship from our port in Qingdao or Shanghai, China to anywhere in the world within short days.

Q1: Are you a factory or trading company?
We have our factory for the farm machines and we also have our own trading company with self-supported import and export right.

Q2: How can I trust on your company?
We are a fully registered manufacture and exporting company by China Export Registration Authorities. Moreover, our products have been exporting to a number of countries including Switzerland, Russia, Spain, Netherlands, Australia, Peru, Thailand, Pakistan, Indonesia, Tanzania, Nigeria, South Africa, Sudan, Congo etc.

Q3: Where is your factory located? How can I visit there?
Our factory is located in Linyi City, Shandong Province, China. About 1 hour away from Linyi Airport, 4 hours away from Qingdao airport. All our clients are warmly welcomed to visit us!

Q4: How can I place an order from your website?
It is very easy.Once you find the implement you need on our website and place an inquiry against it, or, get to the inquiry section and leave us a message there with name, country and phone number, we will get in touch with you at the earliest.

Q5: How can I make the payment?
Payment is made via Telegraphic Transfer (T/T) through the bank against the proforma invoice.
30% as prepayment and the balance when the goods are ready for shipping.

Q6: What's the Payment terms?
T/T, L/C or some other ways payment method.

Q7: At which port do you usually ship the good?
We usually ship goods via Qingdao port of China.

Q8. How about the Warranty ?
12 months warranty from the time of the goods arrive at destination.