SGS Certificate 50kpa Inflatable Pneumatic Marine Rubber Fender

Min.Order: 1
Product origin: Qingdao, Shandong, China
Infringement complaint: complaintComplaint
US$ 800 ~ 4500

Description

Yokohama Pneumatic Rubber fender is the advanced anti-collision device for marine application in the world. Pneumatic rubber fender is also known as floating fender or Yokohama type tugboat rubber fender, it is often installed on the terminal or ship, which aims to absorb or reduce the collision energy between ship to ship and ship to dock. This kind of product can protect the ship or dock from the damage of collision. With inner compressed air, it can float on the water and widely used as protecting medium equipment. Size : D0.5 m x L1.0 m ~ D 4.5 x L9.0m. "XINCHENG" yokohama barco defensas are produced in strict accordance with the ISO17357-2002 and GB/T 2002-2002 international quality standard. Nowadays, our products have been exported to all over the world.
 

Advantages:

1.Large compression deformation, low reaction force, high energy absorption

2. Good floating performance, meet the needs of water level change

3. With compressed air as medium, the collision energy consumption bu compressed air power

4. Easy installation and long service life

 

 

 

Pneumatic Fender Type: 
There are two common types our Pneumatic Rubber Fenders: Net type and Sling type.

1. Net Type Pneumatic Fenders are covered with a chain net, wire net, or fiber net. Each end of longitudinal chains, wires, or fibers is linked together with one or two ring(s), which shall be connected with a guy chain or guy-rope. Usually, these nets have used tires together with rubber sleeves for additional protection to the fender body, except for fiber net which has only rubber sleeves. Chain nets last longer against corrosion, while wire nets are light and more easily repaired.

2.Sling Type Pneumatic Fender 
is common type of Pneumatic Rubber Fenders. It is designed without chain and tyre net. So its advantage is lower weight than traditional chain and tyre net fenders. Meanwhile, Sling type pneumatic fender commonly used for some small and medium size vessel.

Larger Size Pneumatic Fenders 

Floating Pneumatic Fenders' diameter is 500 mm  to 4,500 mm at maximum. The range of lengths are 1000 mm to 12,000 mm, as well as special sizes. The sling-type or chain & tire net(CTN) are available for both sizes.



Pneumatic fenders Production Standard:
Xincheng Pneumatic fenders have passed ISO9001 Quality management system certificate, each fender is fully comply with ISO17357-2014 and GB/T21482-2008 international Production Standard.

There are two initial pressure rating for our Pneumatic Rubber Fenders. 
Pneumatic 50 (P50, Initial internal pressure 50kPa)           
Pneumatic 80 (P80, Initial internal pressure 80kPa) 

Normal SizeInner Pressure:50Kpa,60%deflectionInner Pressure:80Kpa,60%deflection
(mm)(mm)(KN)(KN.M)(Kpa)(KN)(KN.M)(Kpa)
DiameterLengthReaction ForceEnergy AbsorptionHull AbsorptionReaction ForceEnergy AbsorptionHull Absorption
5001000646132858174
60010007481269811166
70015001371713518024177
100015001823212223945160
100020002574513233863174
120020002976312639088166
13502500427102130561142170
15003000579152132731214174
17003000639191128840267168
200035008753081281150430168
2500400013816631371815925180
25005500201994314826531317195
330045001884117513024761640171
330065003015181414639612532191
3300106005121309017166124294220
450070004660381618658664945233
450090005747475214675516633192
45001200079846473154104909037202
 
  • Reaction force and energy absorption torelance is +/-10%.
  • Weight tolerance is +/-10%.
  • Special size and be produced to meet user's requirements.
  • The fenders' colors are usually be black and grey (Navy)

 Pneumatic Fender Packing and shipping:
Xincheng Pneumatic Fender have many ways for our clients to choose, such as infate packing (with air) and deflated packing(without air),. For bigger size fenders, it had better to ship without air, aim to help you to save much transportation cost.


Qingdao Xincheng Rubber Products Co.,ltd was founded in 1986, mainly produces pneumatic rubber fenders, marine rubber airbags, ship launching with airbags applications, foam filled fenders and other rubber fenders, which as the leading enterprise has passed CCS , ISO9001:2008, SGS, BV certificates. We have established long time cooperation with many clients, from Southeast Asia, Middle East, South America and EU countries and many other countries throughout the world.
1. What features do yokohama fenders have?
The Yokohama pneumatic floating fender is fully compliant with ISO 17357 and GB/T21482-2008 international production standards. Each Yokohama fender is clearly marked with all relevant identification and fitted with a set of accessories free of charge. Available in a whole variety of different sizes, each fender comes with up-to-date certifications.
 
2. What makes Yokohama fenders better than other surface fenders?
All Yokohama pneumatic floating fenders are constructed with an inner rubber layer, this is reinforcing the cord layers and the outer rubber layer. They then have a thick outer skin which supersedes that of a normal surface fender. All fenders with a diameter of 2.5m and above are also fitted with a safety valve.
 
3. What application are Yokohama fenders used for?
Yokohama fenders are suitable for a whole host of applications, you can use them for various ship-to-quay and Ship-to-Ship applications with different a whole host of different sizes available. They are easy and inexpensive to install with only a guy rope of a chain required. They can also easily be transferred to alternative mooring points.
 
4. Can I use chain and tyre fender nets with Yokohama fenders?
Yes, all Yokohama fenders are fully compaitble with Marine's chain and tyre fender nets.
Scroll to Top