High Strength FRP I Beam

Min.Order: 1

Product origin: Nanjing, Jiangsu, China

Infringement complaint:

Complaint

US$ -1

Description

1. FRP I beam are manufactured with the pultrusion process after choosing the correct raw materials major including the resin, fibers and additives according to the profiles requirement including mechanical strength, electrical insulation, anti-corrosion etc.

2. FRP I beam can meet the customer's requirements by using different combination of resin, fibers and others.

3. FRP I beam offer a unique combination of chemical resistance, size stability, high strength, and thermal/electric non-conductivity, etc.

4. FRP I beam is extensively suitable for operation platform, equipment platform, stair tread, ditch cover, bridge walkway, supporting for filter filling. In petroleum, chemical, power, offshore prospecting electroplating, marring water and waster water treatment, paper making, brewery and pharmacy industries. It is satisfying load-bearing member in corrosive environmen

5. Some normal sizes of FRP I beam:(Pls note special sizes are also welcomed.)

6. Following is General Physical Parameters of FRP Pultruded Profiles.(If have special requirements, pls contact Nanjing Jinglue.)

LW-lengthwise CW-crosswise PE=perpendicular to laminate face

Mechanical performance			Value		Units		Test method
Tensile strength	LW		230-600		Mpa		ASTM D-638
	CW		45-80
Tensile modulus	LW		18-30		Gpa		ASTM D-638
	CW		7-13
Flexural strength	LW		300-700		Mpa		ASTM D-790
	CW		80-120
Flexural modulus	LW		20-26		Gpa		ASTM D-790
	CW		7-12
Compressive strength	LW		280		Mpa		ASTM D-695
	CW		105
Compressive modulus	LW		21		Gpa		ASTM D-695
	CW		7.9
Interlayer shear strength	LW		25		Mpa		ASTM D-2344
Impact strength			280		KJ/M2		ASTM D-256

Physical property				Value		Units			Test method
Barcol Hardness				50		---			ASTM D-495
Water absorption(25 Centigrade,24h)				0.2-0.5		%			ASTM D-570
Density				1.75-2.00		g/cm3			ASTM D-792
Coefficient of thermal expansion(LW)				5.0		10-6/Centigrade			ASTM D-696
Coefficient of thermal conductivity				0.4		W/(m.K)			ASTM C-518
Elongation to break				0.9		%			ASTM D-638

Electrical property		Value			Units			Test method
Arc resistance(LW)		120			seconds			ASTM D-495
Dielectric constant(PF)		5			@60hz			ASTM D-150
Dielectric strength(PF)		8			KV/mm			ASTM D-149
Dielectric strength(LW)		1.6			KV/mm			ASTM D-149

Flammability property		Value			Units			Test method
Tunnel test		Max 25			second			ASTM E-4
Oxygen data		25-28			%			ASTM 2863
		28-32
		>32
Flammability classification		Self extinguish						ASTM D635