APPLICATIONS 1.Remove plague for placement of sealants. 2.Surface Preparation prior for bonding/cementation of inlays onlays, crowns and veneers. 3.Surface preparation prior to placing composite restorations. 4.Cleaning prior to bonding orthodontic brackets. 5.Effectively remove plaque and stain for orthodontic patients. 6.Cleaning implant fixtur. 7.Remove stain for shade determination. 8.Remove plague prior to fluoride treatment. 9.Polishing on the surface of teeth after scaling treatment by piezo scaler. CL EANING AND DISIN FECTING 1. Uncover the chamber cap, empty the powder chamber. 2. Keep operating the unit after shutting off the water supply. Use compressed air to blow out the remaining water and powder in the pipe. 3. Blow out the remaining powder in the chamber and connector with dry compressed air. 4. Remove the handpiece, connect the handpiece to the cleaning spray nozzle, the connect the nozzle to the hose of dental unit. Keep the air running for at least 10 seconds to thoroughly clean the handpiece tubes. 1. Wash the powder chamber cap, cap ring, cap dome and handpiece with distilled or deionized water. 2. Clean the threads of the powder chamber, body surface and handpiece surface with alcohol (ethanol, isopropanol). 3. Enclose the handpiece in a steriliation bag and seal the bag. 4. Sterilize the handpiece at up to 135°C in the autoclave. (121°C,20 minutes or 132C, 15 minutes)
Complaint
