Description
PRODUCT DESCRIPTION
1)PLC control system for continuous production
2)High level electrical control make sure the accurate and reliable mechanical movement and operation
3)The product diversifies repeated level cloth,realization
4)Raw material kind: Sandstone,phosphogypsum,fly ash,aggregate chips,ceramic tile,slag,EPS pellet,building rubbish etc.
Lego brick raw material condition: |
1.10% cement + 90% clay |
2.10% cement + 15% sand +75% clay |
3.10% cement + 85% clay+5% pigment |
4.some clients in Africa use 100% clay to produce bricks for low house |
The more cement,the higher strength of the brick which you will be achieved. |
It can produce both clay bricks(without firing) and cement blocks. |
Main Parameter Series Concrete Block Making Machine
Main Specification |
Overall Size | 1200(L)×1200(W)×2100(H)mm |
Control | PLC |
Cycle | 10 Seconds |
Total KW | 5.5 kw or 12 HP |
Electrical source | 380V/50Hz(adjustable)/diesel engine |
Pressure | HYDRAULIC PRESS IS 20 TONS | | |
Total Mass | 1500kg |
Brief introduction of Brictec Engineering Co.Ltd
Xi'an Brictec Engineering Co. Ltd not only majors in sale of brick making machines,but also concentrates on the overseas domestic fired brick designing, kiln designing, factory building designing and turn-key project.We provide solutions to brick and tile making industry by a group of professionals who have more than 25 years experiences in this industry.
The Service We Provide
Before sale: Give some advices to customer on how to build a new-brand brick plant and choose the best and economic plant according to the local situation for recovering the investment within a short time; We are also responsible for the offer, flow chart, and detailed information of each machine.
In sale: We will send the technicians to coach brick making machines installation and debug machines. We also train the local operators till they can fully control them.
After sale: Regularly visit customers, solve all the problems with the machine and take advice from customers.