Description
OEM ODM Necero (China) has a number of patents in the field of optical fiber cable manufacturing, which can design and manufacture various of optical cables according to different requirements.
Our Products Include:Outdoor Optical Cable / Indoor Optical Cable / Indoor Armoured Fiber Optic Cable / FTTH Cable / ADSS CABLE / Optical Power Composite Cable / Stainless Steel Tube Optical Cable / Air Blowing Fiber Optic Cable /fiber optic jumper /PLC Splitter / Fiber Optic Adapter / Optical Fast Connector / ONU / Optical Termination Box / Fiber Media Converter / Industrial Ethernet Switch / Optical Fiber Splice Closure etc...
We are 20 years fiber optic cable manufacturer.
Welcome to go to the factory tour!
Send message to us can get free samples.
All Dielectric Self-supporting Aerial Cable(ADSS)
ADSS cable is loose tube stranded. Fibers, 250μm , are positioned into a loose tube made of high modulus plastics. The tubes are filled with a water-resistant filling compound. The tubes (and fillers) are stranded around a FRP (Fiber Reinforced Plastic) as a non-metallic central strength member into a compact and circular cable core. After the cable core is filled with filling compound. it is covered with thin PE (polyethylene) inner sheath. After stranded layer of aramid yarns are applied over the inner sheath as strength member, the cable is completed with PE or AT (anti-tracking) outer sheath.
We have the world's leading ADSS optical cable production equipment, and the tensile force ofthe optical cable produced is 18% higher than the industry average index.Every fiber that leaves the factory has been rigorously tested.
Characteristics
* Can be installed without shutting off the power
· Excellent AT performance, The maximum inductive at the operating point of AT sheath can reach 25kV
· Light weight and small diameter reducing the load caused by ice and wind and the load on towers and backprops
· Large span lengths and the largest span is over 1000m
· Good performance of tensile strength and temperature
· The design life span is 30 years
Application
*The design of ADSS cable takes full account of the actual situation of power lines and is suitable for different grades of high
voltage transmission lines. Polyethylene ( PE ) sheath can be used for 10 kV and 35 kV power lines. For 110 kV and 220 kV power
lines, the optical cable hanging point must be determined by calculating the electric field strength distribution and the
electric mark ( AT ) outer sheath must be adopted. At the same time, the amount of aramid fiber and the perfect stranding
process were carefully designed to meet the application requirements of different spans.
Optical Characteristicd
| G.652 | G.655 | 50/125μm | 62.5/125μm |
Attenuation(+20ºC) | @850nm | | | ≤3.0 dB/km | ≤3.0 dB/km |
@1300nm | | | ≤1.0 dB/km | ≤1.0 dB/km |
@1310nm | ≤0.36 dB/km | ≤0.40 dB/km | | |
@1550nm | ≤0.22 dB/km | ≤0.23dB/km | | |
Bandwidth(Class A) | @850nm | | | ≥500 MHz·km | ≥200 MHz·km |
@1300nm | | | ≥1000 MHz·km | ≥600 MHz·km |
Numerical aperture | | | 0.200±0.015NA | 0.275±0.015NA |
Cable Cutoff Wavelength | ≤1260nm | ≤1480nm | | |
Product Parameters
Product packaging
Our Advantages
Why Choose Us
Quality Assurance
Each step in the production process will perform quality inspection.From raw material to the entire production process, we have established a comprehensive quality management system.
Durina the entire production process. we will record the test results of each production sten to ensure that all products meet the standards of auality requirements.
Complaint
