Complaint
New Stationary Dangerous Liquid Explosive Detector, Liquid Scanner Liquid Detector Manufacture
Safeway System -
We're the original supplier and can provide you
factory price, with best quality
Liquid Scanner -Model: AT1000
Product introduction
The liquid detector is a security instrument specially used to detect flammable and explosive liquids. It can distinguish liquid explosives, gasoline, acetone, ethanol and other flammable and explosive liquids from safe liquids such as water, cola, milk and juice without directly contacting the liquid. This product can effectively prevent dangerous liquids (liquids that can cause burning or explosion) from entering safe areas. It is a necessary safety inspection instrument for crowded and important activities such as stations, subways, government agencies, stadiums and so on.
Technical Parameters
NO | |||
1 | Containers material | Non-metallic containers: plastic / glass / ceramic, metal containers: aluminum, iron | |
2 | Size of the containers | 1. Plastic / glass / ceramic: Volume: not less than 100ml, height not less than 3cm Diameter: more than 30mm less than 200mm Maximum height: no limit Wall thickness: no more than 8mm 2. Metal container: Volume: not less than 100ml, height not less than 3cm Diameter: more than 30mm less than 150mm Maximum height: no limit Wall thickness: no more than 0.5mm | |
3 | Dangerous Liquid Detectable | The instrument is capable of alarming the following flammable or hazardous liquids in sealed containers: 93# gasoline, kerosene, diesel, ether, diisopropyl ether, petroleum ether, acetaldehyde, ethylene glycol, nitrobenzene, propylene oxide, n-heptane, pine perfume, acetone, benzene, toluene, xylene, dichloro Ethane, ethanol, isopropanol, 70% ethanol, carbon disulfide, methanol, nitromethane, 70% isopropanol, Paint thinner (nitro thin solvent), tetrahydrofuran, paint,Hexane, hydrochloric acid, sulfuric acid, nitric acid | |
4 | Volume requested | Not less than 100ml, height not less than 3cm | |
5 | Time of testing | Single piece of liquid item detection time is less than 8 seconds Insulated container (plastic, glass, ceramic container): less than 1 second Metal container (aluminum can, iron can): less than 4 seconds | |
6 | Max. Power consumption | Less than 20W | |
7 | Data Storage | Stores no less than 10,000 tests results, and can export data through standard USB interface, read and analyze through PC software | |
8 | Insulation resistance | Between the source plug or the power inlet and the bare metal part of the housing Insulation resistance, not less than 100 MΩ at normal temperature; after damp pretreatment with relative damp heat of 91% to 95%, temperature of 40 ° C, 48 hours, equipment The insulation resistance is not less than 2MΩ. | |
9 | Leakage current | The leakage current of the equipment during working in accordance with the safety requirements of electronic equipment, less than 5mA | |
10 | Weight | Around 8.3Kg | |
11 | Working Temperature | -10ºC~55ºC; 0%~90% | |
12 | Pressure | 86kPa~106kPa | |
13 | Power supply | AC 180V-240V (50/60Hz) |
Functional characteristics
NO | |||
1 | Time Setting | Set the time for the equipment | |
2 | Password settings | Modify the initial password | |
3 | Adjust contrast value | Set the brightness of the LCD screen. The higher the value, the brighter the screen. | |
4 | Device ID | Display device ID, find settings information | |
5 | Restore settings | Enter password to restore factory settings | |
6 | IP setting | Communication with the host computer through the network interface and USB interface | |
7 | Switch account | Identify the user who is currently operating the system, and then save the detection result combined with the user name. | |
8 | Language selection | Switching between English and Chinese | |
9 | Equipment parameters | for after-sales engineers to set the parameters according to the specific environment | |
10 | Firmware version | Indicates the current version and for further upgrading | |
11 | Accuracy adjustment | Adjust the recognition accuracy of the software by setting the value | |
12 | Self-checking
| When there are a lot of false alarms, use this function to improve the inspection accuracy of the machine | |
13 | Alarm sound | switch on/off sound alarm | |
14 | Alarm reset mode | Select alarm rest whether when the object to be removed not when not removed | |
15 | Alarm Indication | sound, light, LCD display alarm |
Key Components
NO | |||
1 | Screen | Top Micro, LM240160CCW, 240x160 black and white LCD | |
2 | Main board | Control-E | AT |
3 | RF power amplifier board | AT1000-PA-D | AT |
4 | RF receiver board | RX-C | AT |
5 | RF transmitter board | TRA-E(printed as TAR-E) | AT |
6 | Antenna board | Tianhe-antenna | AT |
7 | Heating film | AT1000II, JIAREMO,Version: G | |
8 | Thermocouple | Taiwan Taishi, NR81531B | |
9 | Keyboard | DeZhongHeng, K38-1, 78x98mm, English |
Accessories List
NO | List | Quantity | |
1 | AT1000II-2 Detector | 1 | |
2 | 1.5m USB cable | 1 | |
3 | 2m power cable | 1 | |
4 | 2m Crossover internet cable | 1 | |
5 | Accessories box | 1 | |
6 | Manual, certificate / warranty card | 1 | |
7 | 250MLPlastic sampling cup | 1 |
References
