Rated power (Continuous) | W | 60 (40W/60W) | |||
Rated speed | r/min | 2500 | |||
Rated torque | N.m | 0.230 | |||
Instantaneous maximum torque | N.m | 0.345 | |||
Rotor moment of inertia | J:X10-4kg.m2 | 0.082 | |||
Speed control range | RPM | High pressure 200-2500RPM (Low pressure 200-3000RPM) | |||
Speed control range | On load | Below ±1%: condition 0~ rated torque, rated speed, rated voltage, room temperature | |||
On voltage | Below±1%: condition rated voltage ±10%, rated speed, rated load, room temperature | ||||
On temperature | Below±1%: Conditions of ambient temperature 0~+40°C rated voltage, rated load and rated speed | ||||
Power input | Rated voltage | V | Single phase 110V | Single phase 220V | 24VDC(Optional 36VDC/48VDC) |
Voltage tolerance range | ±10% | ||||
Frequency | HZ | 50/60 | / | ||
Frequency tolerance range | ±5% | / | |||
Rated input current | A | 1.7 | 1.0 | 3.7 | |
Instantaneous maximum input current | A | 3.3 | 1.9 | 5.6 |
plughole | 1 | 2 | 3 | 4 |
signal | U | W | Hv | Hu |
plughole | 5 | 6 | 7 | 8 |
signal | V | GND | Hw | Vcc |
Corresponding meaning | |||||||||
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
Blue (coarse) | Yellow (fine) | Yellow (coarse) | Green (fine) | Green (coarse) | Blue (fine) |
| Metal mesh | Red (fine) | Black (fine) |
W | Hu | U | Hv | V | Hw |
|
| Vcc+5V | GND |
•Parallel Shaft Speed Reducer
Z4BLD40-4GN-25S(4GN30RC)-Voltage 24/36/48/110/220 ()-Velocity Ratio Value
•Decimal Gearhead
4GN()XK-10 Velocity Ratio Value, Generally 10
Gearhead Model | Gear Ratio | L Dimension |
4GN()K | 3-18 | 32&43.5 |
20~200 | 43.5 |
•Enter the gear ratio in the box () within the model name
•Z4BLD40-4GN-25S(4GN30RC) Machine Allowable Torque (Unit: N.m)Model | Motor Speed/Reduction Ratio | 3 | 3.6 | 5 | 6 | 7.5 | 9 | 10 | 12.5 | 15 | 18 | 20 | 25 | 30 | 36 | 50 | 60 | 75 | 90 | 100 | 120 | 150 | 180 | 200 |
| 200~1500RPM | 0.72 | 0.87 | 1.21 | 1.45 | 1.81 | 2.17 | 2.41 | 3.02 | 3.62 | 4.34 | 4.35 | 5.44 | 6.53 | 7.83 | 8.00 | 8.00 | 8.00 | 8.00 | 8.00 | 8.00 | 8.00 | 8.00 | 8.00 |
Z4BLD40-()GN | 2000RPM | 0.70 | 0.84 | 1.16 | 1.39 | 1.74 | 2.09 | 2.32 | 2.90 | 3.48 | 4.18 | 4.64 | 5.23 | 6.27 | 7.52 | 8.00 | 8.00 | 8.00 | 8.00 | 8.00 | 8.00 | 8.00 | 8.00 | 8.00 |
| 2500RPM | 0.56 | 0.67 | 0.93 | 1.11 | 1.39 | 1.67 | 1.86 | 2.32 | 2.78 | 3.34 | 3.71 | 4.18 | 5.02 | 6.02 | 8.00 | 8.00 | 8.00 | 8.00 | 8.00 | 8.00 | 8.00 | 8.00 | 8.00 |
Note :The() (gray) in the table indicates that the rotation direction is consistent with the motor.(The torque under different speed and speed ratio is obtained under the ZD standard.)
•L Type Speed ReducerMotor Speed/Reduction Ratio | 5 | 10 | 15 | 20 | 30 | 50 | 100 | 200 |
200~1500RPM | 1.21 | 2.41 | 3.62 | 4.83 | 6.53 | 10.9 | 21.8 | 39.3 |
2000RPM | 1.02 | 2.04 | 3.06 | 4.08 | 5.52 | 9.20 | 18.4 | 33.3 |
2500RPM | 0.83 | 1.67 | 2.51 | 3.35 | 5.02 | 8.37 | 16.7 | 30.3 |
Note :All gearbox output turn direction in form are opposite as motor turn direction.(The torque under different speed and speed ratio is obtained under the ZD standard.)