9LTR Water Base Fire Extinguisher

9Ltr Water based Fire Extinguisher 

1. Specification of 9Ltr Water Fire Extinguisher :

2. Component for 9Ltr Water Fire Extinguisher :

PVC discharge hose with nozzle, length: 630mm

Brass valve with hanger loop, middle black handle

Spring gauge, thread: M10*1-12.5

Steel hook

PVC siphon tube, length: 505mm

Plastic sealing, length: 250mm

3. Packing Details of 10Ltr Foam Fire Extinguisher :

Each one packed with plastic bag,  1PCS/CTN

Carton Size: 18*18*64cm

Gross Weight:14KG

5. Loading and Shipment of Foam Fire Extinguisher,  Foam Fire Fighting Equipment 

1. Quickly take extinguisher at a site, extend to 7 meters away to the fire;

2. Shaking cylinder up and down before use, to loose the inside powder;

3. Take out the discharge hose, then safety pin;

4. Hold the hose with one arm, aim the nozzle of the fire;

5. Push the handle, sweep side to side;

6. Keep upright position during powder spray, do not lying, upside down.

1. Fire extinguisher is pressure vessel,  should prevent collision during the transportation;

2. Should placed within reach and in a dry and ventilated place at a temperature of  -10°C~+45°C;

3. Preventing damps, solarization;

4. The parts in good installed, check it frequently;

5. Regularly check if inside powder is caking, replace if yes;

6. Regularly check if gauge pointed in green area, to find lower or overcharge gas, refill them by the pointer's condition;

7. Recharge immediately after complete or partial use;

8. Cylinder should be Hydraulic Tested every 5 years, qualified them can be used.

6. Do you know how many processes for produce Fire Extinguisher?