Complaint
Applications:
1) Medical supplies: Operational instruments, injectors, transfusion systems, tubes, contraceptive equipment
2) Medical appliances: Endoscopes, heart pacemakers, artificial hearts, dialyzers, suction apparatuses
3) Sanitation articles: Feminine sanitary napkins, disposable tableware
4) Medicine: Traditional Chinese medicine, Western medicine, cosmetics
5) Textile and biological products: Cotton, woolen and chemical fiber garments, leather, blankets, brushes
6) Instruments and meters: Electronic instruments, optical instruments, telephones
7) Other: Money bills, records, letters, valuable historic relics, thin silk and satin products, animal specimens
| Heating method | Electric heating |
| Power | 3.0KVA AC.220V, frequency 50Hz |
| Equipment (Length × Width × Height) | 795 × 615× 1140mm |
| Liner size(Length × Width × Height) | 585 × 375 × 472mm |
| Effective Volume | 120L |
| Weight | 147KG |
| Temperature display | LCD touch screen |
| Material of Sterilization Room | 304 anti-corrosion stainless steel |
| Outer box material | Carbon steel (thickness 1.8mm) baking powder |
| Temperature during sterilization | 50 ºC |
| Working pressure | -60kpa |
| Highest anti-stress value | -80kpa |
| Humidity during sterilization | 45% -75% |
| Selected gas | Pure ethylene oxide gas |
| Sterilization time | 0-99 hours adjustable |
| Vacuum speed | 15 minutes to pump to -60kpa |
| Air Replacement | Automatic ventilation, 5 cycles of ventilation, every 15 minutes |
| Full-automatic control system | One-click start to end, the whole process is automatically completed |
| Display status | Display operating status, temperature, humidity, pressure, sterilization time, residual gas treatment time, times, steam generator temperature. |
| Display status | Display operating status, temperature, humidity, pressure, sterilization time, residual gas treatment time, times, steam generator temperature. |
| Printer | Use a micro printer to print out the data every minute during the entire sterilization process, which can be stored permanently. |
| Humidity Sensor | The built-in humidity sensor automatically detects the humidity in the cavity. |
| Pressure Sensor | The built-in pressure sensor automatically detects the pressure in the cavity. |
| Temperature Sensor | The built-in temperature sensor automatically detects the temperature in the cavity, the accurate range is 50 ºC ± 3 ºC. |
| Sealed door | Using 5052 high-quality aviation aluminum, thickness ≥15mm, pressure resistance 200Kpa. |
| Humidification System | Pulse humidification under vacuum. |
| Residual gas treatment device | The filtration rate of the filter to the particle diameter ≥0.3μm is not less than 99.5%. |
| Leakage rate of sterilization chamber | The measurement of the leakage rate is carried out under the conditions of no load, the temperature of the sterilization chamber is unchanged, the test pressure is -50kPa, and the measurement time is 1h. The average leakage rate within the measurement time is ≤0.1kPa/min. |
| Vacuum rate | Under no-load conditions, the time for the sterilizer to vacuum from atmospheric pressure to -60kPa should be ≤30min. |
| Automatic dosing | Built-in piercing technology in the sterilization chamber. |
| Automatic memory recovery function | When the power is cut off unexpectedly, the sterilizer will automatically remember the state when it is stopped. |
| Heating system | Use explosion-proof electric heating device. |
| Various protection functions | With over-voltage and over-temperature protection function, it is safer and more reliable. |
| Alarm system | There are high temperature alarm system, ultra-low pressure alarm system. |
| Power-off memory function | If the power is cut off during the sterilization process, the screen will prompt "Yes" and "No" to continue the previous operation after the power is turned on again. At this time, you can select "Yes" to continue the last run. You can also choose "No" to cancel the operation. |
