Ahkc-E Close Loop Hall Current Sensor 0~500A Input 4/5V Output

Min.Order: 1
Product origin: Shanghai, China
Infringement complaint: complaintComplaint
US$ 8.4

Description
1 Introduction
Hall current sensor is mainly used for isolated conversion of complex signals such as AC, DC and pulse.Through the principle of hall effect, the transformed signal can be directly collected and accepted by AD, DSP, PLC, secondary instrument and other devices.Hall current sensors are widely applicable for acquisition and feeback control of current signals in the current monitoring,inverter,solar power management,current cabinet,DC motor drive and UPS servo control systems.It has the advantages of fast response time, wide range of current measurement, high accuracy, strong overload ability, good linearity and strong anti-interference ability.

close loop ac dc hall current sensor hall effect current transducer 0~500A input  4/5V output 15v power supply AHKC-E is an open loop device based on the measuring principle of the hall effect, with a galvanic isolation between primary and secondary circuit. 


2 Parameters




3.Product
ParametersIndicators
Rated input current±20~±500A
Rated input voltage±5V/±4V
Accuracy1.0
Power supplyDC±15V(Allow the volatility±20%)
Zero offset voltage±20mV
Offset voltage drift≤±2.0mV/ºC
Linearity0.2%FS
Response time5us
Frequency0~20kHz
Insulation voltage2.5kV/50Hz/1min
Working temperature-40ºC~85ºC
Storage temperature-40ºC~85ºC
Power consumption≤0.5W





Product Tag:
Related categories:
Scroll to Top