Description
End Suction Circulating Water Pump for hot water LDP series single-stage end-suction horizontal centrifugal pumps are made by way of improving the
design of NT series horizontal centrifugal pumps of ALLWEILER PUMPS company with the performa nce
parameters identical to those of NT series and in line with the requirements of ISO2858.
The products are produced strictly according to the relevant requirements, so they have a stable quality and reliable performance and are the brandnew ones instead of model ES horizontal pump, model DL pump etc. ordinary pumps.Technical specifications| Capacity | 3.5-1400 m3/h |
| Head | 3-140 meter |
| Working Pressure | up to 1.6 Mpa |
| Diameter | DN 25-350 mm |
| Temperature range | -20ºC~110 ºC |
| Pump speed | 1000-3600 RPM |
√ LDP Advantage End Suction Circulating Water Pump 1.Compact structure. √ These series pumps have an Horizontal structure, beautiful appearance and less area of occupied land.
2.Stable running, low noise, high concentricity of assembly. √ The cluth is used to link both pump and motor, making the impeller of a good balance of moving-resting, resulting in no vibration during running and improving the environment of use.
3.No leakage. √ A mechanical seal antisepticcarbide alloy and packing seal of is used for the shaft sealing.
4.Convenient service. √ Service can be easily done without removing any pipeline because of the back-door structure.√ Where can use our LDP End-suction Centrifugal pump ?LDP series horizontal centrifugal pump is used to
- Transport pure water and other liquids of the similar physical nature as pure water
- Water supply and drainage in industries and cities
- boost water-feeding of high buildings
- Park/Garden Irrigation
- Fire-fighting boost
- Remote mater-transportation
- Warming or cold-hot water circulation
- Boost in bathrooms
- Equipment completing as well. √ STRUCTURE DESCRIPTION of LDP End-suction Centrifugal pump ?See the figure for the structure. This pump consists of pump casing, impeller, pump cover, suspension body and shaft etc.components. It is a single-stage single-suction horizontal centrifugal pump a nd b oth p ump c asing and cover are separated from the back side of the impeller, that is the back-door structural form. For most of the pumps, a seal ring is set in both front and back of the impeller to make a balance action on the axial force of the rotor.There are soft packing seal and mechanical seal, make a note at order.
| No | Name | Quantity | No | Name | Quantity |
| 1 | Pump casing | 1 | 6 | Mechnical seal parts | 1 |
| 2 | Impeller | 1 | 7 | Packing parts | 1 |
| 3 | Impeller nut | 1 | 8 | Breakwater ring | 1 |
| 4 | Pump cover | 1 | 9 | Suspension body parts | 1 |
| 5 | Seal ring | 2 | 10 | Shaft | 1 |
More detail about our High Efficency High Efficency End Suction Circulating Water Pump for hot water please contact with Tongke Flow engineer.About Us Production processInternational Certificatekinds of used for Pure, slightly polluted and gressive liquid with a viscosity of up to 150 mm
2/s, solid particles less than 75 mm.
Quality certificate
Company Image
Service
Twenty years design and engineering experience and More than ten years over sea market Experience. Tongke provide most professional and thoughtful Pre-sales and After service.
Technical training Equipment evaluation
Installation and debugging Troubleshoot
Maintenance Update and improvement
Commitment to the service
1.One-year warranty. Provide technical support free all-life of the products.
2.Keep all-life contacting with clients, get feedback on use of the equipment and make the products quality continually perfected.
3.Hot-line of service is available in 24h, responded in 8h.
Your call and mail is welcome at any time
End Suction Circulating Water Pump for hot water | Contact | Mr Seth Chen |
| Telphone | 0086-13817768896 |
Complaint
