Split Pressurized Solar Hot Water Heater with Solar Keymark

Min.Order: 1
Product origin: Jiaxing, Zhejiang, China
Infringement complaint: complaintComplaint
US$ 750

Description
Split Pressurized Solar Hot Water Heater SFCY with Solar Keymark

Suntask domestic solar water heating system design uses evacuated tubes and advanced heat retention technology, providing rich hot water.

Suntask split pressurized solar water heater is special designed for the villa. The split means that the collector separates from the water storage tank. The collector may be installed either on the roof or wall while the water tank may be installed at any place in a villa flexible. Collector harmonizes with villa's outlook and maintains villa's outlook beauty.


Model: SFCY-01


Separate pressurized solar water heaters features
1. The upright tank can make the water temperature to a high level. It can hot the water instantly.
2. The tank inside the building, the hot water loses less energy than the normal one
3. The solar collector and the tank of the solar water heater is separated, which makes the system combine with the building perfectly, which will reduce the sightseeing for the building and environment around
4. Back up with electric heater so that in the day without sunshine hot water can also be used
5. Can be combined with gas or electric heater
6. Max. Pressure: 12bar; Operating Pressure: 6 bar
7. It can be used for other functions, such as warming

Separate pressurized solar water heaters working principle
1. The solar collector absorbs solar energy and transmits it to the split pressurized solar water heater tank through circulation
2. When the temperature of the collector reaches the set value, the controller starts the circulation pump automatically
3. The circulation pump makes heat-conducting liquid circulate automatically
4. The heat-conducting liquid transfers heat to water by a lower the heat exchanger in the water tank.
5. When the temperature difference between solar collector and heat pipe solar water heaters tank doesn't reach the set value, the circulation pump will be shut automatically
6. In case the temperature of the water tank does not reach Tmax, Electric Heating Element will start to work automatically

Separate pressurized solar water heaters working station component
1. Operating screen
2. Manometer
3. Pump speed adjust switches
4. Temperature difference circulation pump
5. Flow rate indicator
6. Return circuit connector
7. Safety valve
8. Expansion vessel connector9. Return circuit connector
10. Wall mounting
11. Expansion vessel: 8L-24L
12. Pressure resistance: 10 bar pressure for expansion vessel

DescriptionSeparate pressurized solar water heaters
Material of out manifold0.55mm thickness color steel/ fluorine carbon steel
Material of inner tankFood grade 1.2-2.0 mm thickness SUS304 stainless steel
Tank insulating layer45mm 45kg/m³ high-density polyurethane foam
Inlet and outlet holeMale G3/4
Max pressure0.6 Mpa
Solar collector tube3.3 Borosilicate glass with N/Al coating
The thickness of glass tube1.6mm
Vacuum tube tightnessP≤ 0.005 Pa
Absorptionas=0.93-0.96(AM1.5)
Emission ratioε h=0.04-0.06(80C± 5C)
Idle sunning property parametersY=220~260m2. C/KW
The average heat loss coefficientULT=0.6~0.7W/(m2. C)
Bracket:2.0mm thick aluminum alloy
Welding:Argon arc welding
Fastening pieces:Made of stainless steel screw






 

Scroll to Top