Uh-Iidm Microwave Light Wave Ultrasonic Extractor

Min.Order: 1
Product origin: Xiangtan, Hunan, China
Infringement complaint: complaintComplaint
US$ 15738 ~ 19672

Description
Uh-Iidm Microwave Light Wave Ultrasonic Extractor

Description:

At present, the widely used ultrasonic extractor in laboratory is to transfer the ultrasonic wave generated by the ultrasonic transducer through the medium (usually water) and act on the sample, which is an indirect mode of action. The extraction efficiency depends on the vibration intensity High and low, in order to solve the problem of low extraction efficiency, people often increase the extraction efficiency by increasing the ultrasonic generator power (≥300W). However, the larger ultrasonic power will cause unpleasant noise again.

Microwave-assisted extraction technology is the use of target molecules in the sample under the action of microwave electromagnetic field, from the original state of thermal motion to follow the microwave alternating electromagnetic field and quickly arranged orientation, the microwave energy into the sample energy to accelerate the target The process of entering the solvent phase from the solid phase. The existing microwave-assisted extraction equipment, including high-pressure closed and atmospheric pressure open two, although each has its advantages, but there are some shortcomings. For example, high-pressure microwave-assisted extractives require very high strength and tightness of the extraction can material with small sample throughputs (about 0.5-5 g) and long cooling times. Atmospheric pressure open microwave assisted extraction to some extent to overcome the lack of high-pressure closed-end, sample handling capacity also increased significantly, but the sample processing time is longer, the work efficiency decreased.

In order to overcome the shortcomings of the above single ultrasonic or microwave assisted techniques and the charring phenomenon caused by the long time reaction of organic reactions, we try to combine the ultrasonic wave and the light wave (microwave) organically to make full use of the ultrasonic wave Vibration cavitation and high-energy effect of light waves (microwaves), the first concept of pre-processing of samples by synergistic light wave (microwave) -sult ultrasound under the conditions of low temperature and pressure was put forward. The successful development of the UH-IIDM lightwave / Microwave / Ultrasound Combination Extraction System.

Features:
  • A multi-purpose machine: can choose any combination of microwave, ultrasonic, light wave, ultraviolet light and magnetic stirring to realize the multi-purpose of one machine; it is the most effective way to study chemical reaction, chemical synthesis, material preparation and pretreatment of chemical sample Good choice
  • High-efficiency ultrasonic oscillation: The ultrasonic oscillation energy directly acts on the sample in the container, which has high acoustic vibration efficiency, low energy consumption and good effect.
  • sample capacity: up to 1000 mL, greatly increased the sensitivity of analysis;
  • A variety of power control modes: a total of time control, temperature control, power control, speed and switch five modes. According to the sample system, tasks and reaction types to choose;
  • intuitive and convenient operation: the role of microwave adjustable time, a variety of combinations can be any combination and set. Sample reaction conditions and reaction temperature real-time monitoring;
  • safe and reliable: atmospheric environment, no need to process or purchase samples of special materials containers, the operation safer. Direct ultrasonic vibration and high efficiency, good effect; microwave leakage is less than 0.3 mW / cm2 (the national standard of 1 mW / cm2);
  • Wide range of applications: Wide range of sample preparation including inorganic, organic and biological analysis. Especially as a new type of reactor, it is widely used in universities and research institutes to carry out many meaningful research work in chemical reactions, organic synthesis, sample digestion or extraction methods.

Product parameters:
Combination of functions Various combinations of microwave, ultrasonic wave, light wave, ultraviolet ray and magnetic stirring can be selected
Microwave Power 1000W (1% -100%);
Microwave Frequency2450 MHz;
Working Hours 0-999S
microwave mode of action pulsed continuous heating;
Optical power / wavelength 0-800W / infrared section; Working time 0-999S
UV power / wavelength 50W / 365nm;
ultrasonic horn diameter Φ6mm;
Ultrasonic power / frequency 10-1000W / 20-25 KHz;
Ultrasonic mode of action Immersion ultrasonic transducer is in direct contact with the material in the vessel, the acoustic vibration (energy) efficiency is close to 100%;
magnetic stirring 50-300 rev / min
Program control 200 sets of programs can be preset. Each program can preset working time (0-999S), microwave, light wave, ultrasonic power, UV (on / off) Modify and call
temperature control non-contact infrared temperature measurement. Temperature and temperature range, room temperature ~ 300 ºC (± 1 ºC);
machine control full Chinese color touch screen man-machine interface, industrial-grade microcomputer PLC programmable logic controller;
password user, administrator password;
reactor monitoring one screen with real-time video window to monitor the reaction status of the sample;
LED lighting power / color temperature 24W / 6200K;
Network Interface RJ45
Sample volume standard 500,1000 mL (special specifications can be customized according to user requirements);
Protection with magnetron temperature protection, door switch protection and other multiple safety chain protection device, with high reliability and safety.
Material Stainless steel inner shell, durable
cavity volume 25 L;
Power 220 V ± 10% AC, 50 Hz; 3000W;
Microwave leakage in line with national standards
Factory View



                                 
Product Tag:
Related categories:
Scroll to Top