8 Ports Channel 100/1000Mbps PBX Poe Switch VoIP with 2 Uplink and 1 Giga SFP Fiber CCTV IP Network

Min.Order: 5
Product origin: Guangzhou, Guangdong, China
Infringement complaint: complaintComplaint
US$ 38.5 ~ 39.5

Description
To fulfill the demand of High Power POE for network applications with Gigabit transmission,HC-808GP-2G1SFP POE Gigabit Ethernet Switch is an ideal solution. Each 10/100/1000Mbps port of the HC-808GP-2G1SFP features IEEE 802.3af and IEEE 802.3at Power over Ethernet (POE) that combine up to 96/120-watt POE budget on the whole system, It is designed specifically to satisfy the growing demand of higher power consuming network PD (powered devices) such as PTZ (Pan, Tilt & Zoom) / speed dome network cameras, multi-channel (802.11a/b/g/n) wireless LAN access points and other network devices by doubling POE power, more than the current conventional 802.3af POE.
All RJ45 copper interfaces of the HC-808GP-2G1SFP support 10/100/1000Mbps auto-negotiation for optimal speed detection through RJ45 Category 6, 5 or 5e cables. It also supports standard auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or crossover cables. 2 extra 10/100/100Mbps RJ45 and 1 extra 1.25Gbps SFP slots can be used for uplink.

Typical applications please refer to following picture







 

Features

  1. Complies with IEEE 802.3, 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T
  2. 8-Port 10/100/1000Mbps supports 52V DC power to POE Powered Device
  3. 2-Port 10/100/1000Mbps RJ45 interface for uplink
  4. 1 1.25Gbps SFP interface for uplink
  5. Complies with IEEE 802.3af/802.3at Power over Ethernet End-Span PSE
  6. Up to 8 IEEE 802.3af devices powered
  7. Supports POE Power up to 15.4 watts for each POE port
  8. Up to 4 IEEE 802.3at devices powered
  9. Supports POE Power up to 30 watts for each POE port
  10. 96/120-watt POE budget
  11. Auto detects powered device (PD)
  12. Circuit protection prevents power interference between ports
  13. Remote power feeding up to 100m
  14. Hardware based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
  15. Features Store-and-Forward mode with wire-speed filtering and forwarding rates
  16. IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
  17. Integrates address look-up engine, supporting 8K absolute MAC addresses
  18. 2M packet buffer
  19. 10K Jumbo frame supports at 1000Mbps duplex mode
  20. IEEE 802.1Q VLAN packet transparency support
  21. Automatic address learning and address aging
  22. Made of metal, desktop size and wall-mount design

ItemDescription
ModelHC-808GP-2G1SFP
Power SupplyPower Supply Mode Mains on load
Voltage RangeDC52V
Power ConsumptionThe device <5W,                                                        POE power supply <96/120W
Network Port ParameterNetwork Ports 1~8 Ports: 10/100/1000Mbps Ethernet port, adaptive control
Uplink 1 SFP:1.25Gbps and 2 10/100/100Mbps RJ45
Transmission Distance1~8 Ethernet Port:0~100m
Mandatory 10 Mbps reach up to 250m
2 uplink Ethernet Port:0~100m
1 SFP: According to different SFP
Transmission Media1~8 Ethernet Port:Cat5e/6 standard UTP cable,
2 SFP: LC interface optical fiber
POE AgreementIEEE802.3 af/at standards
POE Power Supply ModeEnd-span method
POE Power Supply WattageEach port≤30W,Whole device<96/120W
Network Switch SpecificationNetwork StandardIEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX, IEEE802.3ab 1000BASE-T
Swap ModeStore-and- forward
Switch Capacity22Gbps
MAC Address List8K
Status IndicatorsPower Indicator LightOne power light (green)
Optical Fiber Port IndicatorOne fiber link indication light ( green), Green light keeps on when the fiber port is well connected
POE Indicator1~8 POE indicator light(yellow)
POE Network Port LED1~10 port ( green light on RJ45 jack) Keeps on when normally connected, Blinking when transceiver data
Protection LevelSurge ImmunityLevel 3, executive standard:IEC61000-4-5
Electrostatic Protection1a touch electric discharge: level 3                       1a Air discharge: level 3                               Executive standard:IEC61000-4-2
Operating EnvironmentWorking Temperature-10ºC~55ºC
Storage Temperature-40ºC-85ºC
Humidity(non-congeal)0~95%
Mechanical AttributesDimensions (L*W*H)222mmx128mmx44mm
ColorBlack
Weight1kg
ReliabilityMean time between failures (MTBF)>50000h
 




Product Tag:
Related categories:
Scroll to Top