10kv 11kv 15kv 20kv Disconnect Switch Load Isolation Switch (gw9)

Min.Order: 1

Product origin: Wenzhou, Zhejiang, China

Infringement complaint:

Complaint

US$ 100 ~ 1500

Description

GENERAL

(H)GW9-12 series outdoor high-voltage AC single-phase disconnector/isolation switch (hereinafter referred to as "disconnector/isolation switch") are used for switching 10kV lines under voltage and no load, and for electrical isolation of overhauled high-voltage buses, circuit breakers and other electrical equipment from live high-voltage lines.

Disconnectors/Isolation Switch conforms with the technical standards of GB/T 1985-2014 voltage and current isolation switches and earthing switches, DL/T 486-2010 High Voltage AC isolation switches and earthing switches.

MODEL AND MEANING

USAGE: ENVIRONMENTAL CONDITIONS

Altitude: no more than 1000m. If the altitude is higher than 1000m, the rated insulation level shall be corrected accordingly.
Ambient temperature: upper limit + 45 ⁰C, lower limit - 40 ⁰C, average temperature of hottest month 30 ⁰C, maximum daily temperature difference 25K.
Solar radiation intensity (outdoor): 0.1W/cm²
Wind speed / pressure (outdoor): 0.5 m/s / 700Pa
Pollution level: e-level
Icing thickness: not more than 20mm
Humidity: average daily relative humidity not more than 95%, average monthly relative humidity not more than 80%
Earthquake resistance: horizontal acceleration 0.3m/², vertical acceleration 0.15m/s²
Safety factor: sinusoidal resonance three cycle wave, safety factor above 1.67.

MAIN ADVANTAGES

Significant improvements have been made in product structure and corrosion resistance. After closing, the conductive plate has a self-locking function. When opening, pull the shackle to unlock automatically. It is installed with a conductive spring and spring cover on the base, a lock plate of the self-locking device, a lock hook, and a lock hook spring. All standard parts are made of SUS304 non-magnetic stainless steel, with surface brightening treatment and corrosion resistance.
The conductive plate has no stop lock, the maximum rotation opening is not less than 160 degrees, and there is no stainless steel yellow clip at the home of the conductive plate. It is passivated, riveted, and installed with high elasticity to maintain the contact pressing force.
The main electric circuit parts are made of T2 red copper, and the static contact and terminal block are drawn by integral profiles, which completely solves the problem of poor contact caused by the welding of static contact and terminal block in the past.
All the conductive parts of the main circuit are silver plated with a thickness of no less than 20mm. with the closed anti-oxidation treatment technology, the surface coating is bright and durable, with strong anti-oxidation capacity, excellent conductivity, and circuit resistance of £ 80mm.
The terminal block is of double hole structure, made of hard copper alloy, and the outer layer is silver plated.
The external pressure contact spring is adopted, and the conductive contact surface contacts the "fixed arc" structure, with high uniform pressure and self-purification. The contact pressure remains unchanged for a long time to ensure the safety and reliability of the product for long-term travel.
The insulator is made of high-strength porcelain or silicone rubber composite material and designed with a large creepage distance, which meets the requirements of e-class anti-pollution, and has good anti-pollution ability and long-distance travel characteristics.
The minimum distance to the ground of live parts is greater than 200mm, and the distance between fractures is greater than 230mm, which is suitable for high-altitude areas.

TECHNICAL PARAMETERS

No.	Item		Unit	Data
1	Rated Frequency		Hz	50
2	Rated Voltage		kV	12
3	Rated Current		A	630(1250)
4	Rated Short-time Withstand Current and Duration		kA/s	20(25)/4
5	Rated peak withstand current		kA	50(63)
6	Rated short-time power frequency withstand voltage	Interphase, to earth(dry)	kV/min	42/1
		Fracture(dry)		48/1
		Interphase, to earth(wet)		30/1
		Fracture(wet)		36/1
7	Rated lightning impulse withstand voltage	Interphase, to earth	kV	75
7	Rated lightning impulse withstand voltage	Fracture	kV	85
8	Circuit resistance		μΩ	≤80
9	Mechanical life		Times	3000
10	Pollution grade			e-Level
11	Creepage distance		mm	≥372
Note: If the altitude is over 1000m, the rated insulation level should be modified as appropriate.