Description
Purity over 99.95% Molybdenum glass melting electrodesProduct Description
Molybdenum electrode has high high-temperature strength, good high-temperature oxidation resistance, and long service life. Based on these advantages, it is usually used in daily glass, optical glass, insulation materials, glass fiber, rare earth industry and other fields.
The main component of the molybdenum electrode is molybdenum, which is made by powder metallurgy. The internationally accepted molybdenum electrode has a composition content of 99.95% and a density greater than 10.15g/cm3 to ensure the quality of the glass and the service life of the electrode. Commonly used molybdenum electrodes range in diameter from 20mm to 152.4mm, and the length of a single wire can reach 1500mm.
Using molybdenum electrodes to replace the original heavy oil and gas energy sources can effectively reduce environmental pollution and provide glass quality.
1.Specification:| Diameter,mm | Length,mm | Application |
| Φ(16~20) | 300~1000 | Glass melting, Rare earth, metallurgy |
| Φ(20~30) | 250~1000 |
| Φ(30~45) | 200~1500 |
| Φ(45~60) | 250~2100 |
| Φ(60~100) | 250~1200 |
2.Chemical Composition:
| (Chemical Composition) | Mo Content (%)≥ | Other elements (%) ≤ |
| Al | Ca | Cr | Cu | Fe | Pb | Mg | Mn | Ni | Si | Sn | Ti |
| content | 99.95 | 0.0020 | 0.0030 | 0.0050 | 0.0010 | 0.0060 | 0.0020 | 0.0010 | 0.0010 | 0.0030 | 0.0030 | 0.0030 | 0.0020 |
3.Density:
Density for sintered products: ≥9.8 g/cm3 ;
Density for Press working products: ≥9.9 g/cm3
4.Surface condition:
Silver grey metallic luster .No
5.Hardness:
Hardness for sintered products (HRA) : ≥47
Hardness for Press working products(HRA): ≥50
6.Packing: In Wooden box wrapped with waterproof paper and firmed with packing material .
7.Standard: GB/T 17792-2014.
8.Your Special requests available .
Complaint
