Bilge Monitoring 15ppm Bilge Alarm for OWS with Calibration and Certification15ppm Bilge Alarm for Marine Oil Water Separator
1) Measuring range: 0-30ppm (display range 0-80ppm)
2) Measurement precision: (15ppm alarm) ± 5ppm (meet the IMO standard)
3) Display type : LED digital tube
4) 15ppm bilge water Alarm Alarm indication: 4 red LED
5) 2-way alarm relay
6) Rated capacity of relay contact: 250VAC 3A (non-emotional)
7) 15ppm bilge water Alarm Response time ≤ 5 seconds
8) Output signal: 4-20mA
9) Environment temperature: 0 - 55 Celsius degree
10) Bilge water Alarm Relative humidity: ≤ 93%
11) Sample liquid temperature: 1 - 55Celsius degree
12) Sample liquid pressure: 0.1-0.6MPa
13) Sample liquid flow: 0.1-4L / min
14) Protection class: IP55
15) Main power supply: 220/110VAC 50Hz/60Hz
16) Power Consumption: ≤ 20VA
17) Overall dimension: 400mm × 300mm × 160mm
18) Meet the standard IMO. Res. MEPC. 107 (49) resolution
Bilge Monitoring 15ppm Bilge Alarm with Calibration and Certification
The OCM-15 type bilge water alarm device has been designed specifically for use in continuous monitoring of oil-in-bilge water, 15 ppm alarm and control of discharge, detection, memory and enquiry of alarm status. It is applicable to detect boiler condensate water.And it applies to oil and chemical industries as well.
The OCM-15 type bilge water alarm device use the technology of near infrared measurement, which can display the detected result in real time. The unit is supplied with 2 works-adjusted alarms. The set point (15ppm factory set) could be adjusted at any moment through the panel. If an alarm set point is exceed, the alarms are visible at the front panel and the appropriate relays are switched, that can be achieved the movement control of overrun closedown or the treatment of overrun recycle, and the memory and enquiry of alarm record. Furthermore, a 4 - 20mA(equal to 0 - 15ppm) effective signal output is available for driving a recorder or external meter. The certificate of type approval test has been obtained through comprehensive tests. This device is in accordance with the IMO-Resolution MEPC.107 (49).
Deyuan Marine's 15ppm Bilge Alarm OCM-15 is suitable for all types of Marine Oily Water Separator, fits 220vac or 110vac supply voltage, model OCM-15A fits 24V, we supply OWS 15PPM BILGE ALARM unit with CCS class certificate, IMO approval certificates and Calibration test report which Validity is 5 years.
Welcome to contact us for a good quote and more details of bilge alarm monitors.