Description
0~99ppm Bilge Alarm Oil-in-Water Monitor
INTRODUCTION
The explosion-proof oil concentration meter OCM-8 will be strictly inspected and tested according to the relevant standards of I.M.O. before leaving the Gathering Marine Factory.
In normal use the Oil-in-water monitor should operate correctly and without fault over a long period of time requiring only small amounts of maintenance to be carried out as outlined in the instruction manuals.
Specification of Anti-Explosion Bilge Alarm device| Type | OCM-08 |
| Range: | 0 - 99 mg/l |
| Accuracy | Better than 2mg/l |
| Linearity | better than 2 % |
| Display | 2 digits 7 segment LED's |
| Power Supply: | 220VAC ± 10% |
| Consumption: | 5 VA |
| Alarm Points: | 1-50ppm |
| Alarm Points works set: | 15mg/L |
| Alarm 1 delay | 0-10 second. |
| Alarm 2 delay | 0-10 second |
| Alarm output | Two way relays output |
| Alarm relay output contact value | 5A, 250VAC |
| Alarm relay output feedback signal test | Two way working status contact testing |
| Alarm Indication: | Red LED's |
| Output Signal: | 4 - 20 mA, reversible Ri < 500 |
| Sample Water Pressure: | 0.01 -8bar |
| Sample Flow: | approx. 0.5 - 4 l/min depend on pressure |
| Ambient Temperature: | -20 to + 55° C |
| Sample Water Temperature: | + 1 to + 80° C |
| Size (over all): | 394 mm W x 280 mm H x 135 mm D |
| Degree of Protection: | IP 65 |
| Weight: | 10kg |
| Pipe Connections: | R 1/4" Female |
FeatureCompact and robust construction
Low maintenance
Small dimensions
Easy installation
Continuous on-line work
Works adjustment
Easy zero adjustment via push buttons (+-5ppm)
Other type of Oil-in -Water Monitor are available.
Please contact us ask for detailed if any type of 0~99ppm Bilge Alarm be interested.
15ppm Bilge Alarm is a online real-time monitor, which is designed specially used for the Oily Water Separator on the Marine Ships.
OCM-15 Comply with IMO MEPC.107(49) regulations.
Oil Monitor used to store the alarm output status, alarm feedback signal, alarm time and date, and the current concentration value of the alarm for exceeding the standard water sample.In order to query or output the data stored by the alarm device when necessary.
It can store the data for 18months and also with printing functions too.
Complaint
