Complaint
Low Insertion Loss
Wide Wavelength Range
Low Crosstalk
High Stability, High Reliability
Latching and Non-latching
Specifications
Parameters | Unit | 1×2 optical switch (SW-1x2) | |
Operating Wavelength | nm | SM:1260~1620 | MM:850±40 |
Test Wavelength | nm | 1310 / 1550 | 850 |
Insertion Loss | dB | ≤0.7(typical:0.5) | |
Wavelength Dependent Loss | dB | ≤0.25 | |
Temperature Dependent Loss | dB | ≤0.2 | |
Polarization Dependent Loss | dB | ≤0.05 | |
Return Loss | dB | SM≥50,MM≥30 | |
Crosstalk | dB | SM≥55,MM≥35 | |
Repeatability | dB | ≤±0.02 | |
Swtich Time | ms | ≤8 | |
Durability | times | ≥10 million | |
Operating Voltage | V | 3.0 or 5.0 | |
Optical Power | mw | ≤500 | |
Operating Temperature | ºC | -5~+70 | |
Storage Temperature | ºC | -40~+85 | |
Operating Humidity | ºC | 5~95 | |
Dimension | mm | L70xW35xH17 | |
Note:1. All parameters are tested at room temperature; | |||
2. All parameterses excluding connector, if with connector add 0.2dB IL for each. | |||
| Pins Defining | Optical Route | Electricity driving | Condition Monitoring | |||||||
| Control model | 2×2 | 1 | 5 | 6 | 10 | 2-3 | 3-4 | 7-8 | 8-9 | |
| Latching | Bar | P1-P2 | -- | -- | GND | V+ | Close | Open | Open | Close |
| Cross | P1-P3 | V+ | GND | -- | -- | Open | Close | Close | Open | |
| Non-latching | Bar | P1-P2 | -- | -- | -- | -- | Close | Open | Open | Close |
| Cross | P1-P3 | V+ | -- | -- | GND | Open | Close | Close | Open | |
Ordering Information
X | XX | X | X | X | XX | X | XX |
Mode | Wavelength | Voltage Type | Control Model | Fiber Type | Fiber Diameter | Fiber Length | Connector |
S=SM M=MM | 85=850nm 13=1310nm 14=1490nm 15=1550nm 62=1625nm 65=1650nm 13/15=1310/1550nm X=Others | 3=3V 5=5V | L=Latching N=Non- Latching | 5=50/125 6=62.5/125 9=9/125 X=Others | 25=250um 90=900um 20=2.0mm 30=3.0mm X=Others | 1=1m 2=1.5m X=Others | 0=None 1=FC/PC 2=FC/APC 3=SC/PC 4=SC/APC 5=ST/PC 6=ST/APC 7=LC/PC 8=LC/APC X=Others
|
