Description
it is using the extraction equipment to extract the Pectin from the Fruit Skin raw material.1). For water based extraction: water and herbal raw material are put into the extraction tank and start to give heat source to the interlayer. After the tank boils, reduce the supply heat source and keep the boiling in the tank. The maintenance time depends on the extraction pharmacological process. For example, cooling water is needed for closed extraction to cool the steam and return to the extraction tank to maintain the circulation and temperature.2). For solvent extraction: firstly, the herbal and solventmust be sealed in the tank, and the heat source steam shall be supplied to the interlayer. Open the cooling water to reduce the supply heat source when the tank reaches the required temperature, so that the rising vapor alcohol can flow back into liquid alcohol after passing through the condenser. In order to improve the efficiency, the pump can be used to force the circulation, so that the medicine liquid can be sucked out from the lower part of the tank through the pump, and then the upper part of the cylinder is imported back into the tank, and the local ditch can be removed Flow.3). For thermal reflux extraction:Put the medicinal materials into the extraction tank, add solvents such as water, ethanol, methanol, acetone, etc. (according to the process requirements). Turn on the heating system of the extraction tank, heat the extraction solution to boiling for 20-30 minutes, and then pump one third of the extraction solution into the concentration tank with a filter tube. Close the extraction tank and jacket hot water, open the concentration tank and heating system to keep the temperature of concentrated juice at about 80 ºC and the vacuum degree at -0.05 to -0.08mpa. The secondary steam generated during concentration is turned into condensate through the condenser and cooler and returned to the extraction tank as new solvent to be added into the medicine. The new solvent passes through the medicine layer from top to bottom to the bottom of the extraction tank, The soluble components in the medicinal materials are dissolved in the solvent in the extraction tank, and the extracted solution is pumped into the concentration tank through the suction filter tube. The secondary steam generated by the concentration is sent to the extraction tank as a new solvent to form a new solvent for reflux extraction until it is completely dissolved (the extracted solution is colorless), and the concentration continues until it is concentrated to the required specific gravity ointment. The colorless liquid in the extraction tank can be reused next time. If it is extracted with organic solvent, First, add appropriate amount of water, open the straight system and jacket hot water, recover the solvent, and then discharge the slag. Extraction Processing Machine including the following units:1) multifunctional extractor machine :which is including the extractor tank ,condenser ,sub-cooler ,oil/water separator ,transfer pump etc2) extractor solution storage tank :whch is used to storage the extractor solution.3) concentrator ( evaporator ) machine :which is used to evaporate the water to solvent from the extractor solvent to get the high viscosity ointment ( concentration)4) pipeline inside system : in side pipeline and valve for the system ,which including the product pipeline ,steam pipeline ,cooling water pipeline ,solvent pipeline ,pure water pipeline ,vacuum pipeline etc .5)control by manual operation or PLC/HMI operation.according to the different herbal raw material ,the extractor process is different ,so the herbal extractor machine capacity and structure will be different . It can be designed and manufactured according to different requirements of users.| Technical Parameter |
| Specification model | TQG-1000 | TQG2000 | TQG3000 | TQG6000 | TQG8000 | TQG100000 |
| Volume (L) | 1200 | 2300 | 3200 | 6300 | 8500 | 11000 |
| Design pressure in tank (Mpa) | 0.09 | 0.09 | 0.09 | 0.09 | 0.09 | 0.09 |
| Sandwich design pressure(Mpa) | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 |
| Compressed air pressure(Mpa) | 0.6~0.7 |
| Feeding port diameter(mm) | 400 | 400 | 400 | 500 | 500 | 500 |
| Heating area(m2) | 3 | 4.7 | 6 | 7.5 | 9.5 | 12 |
| Condensation area(m2) | 4 | 4 | 5 | 5 | 8 | 10 |
| Cooling area(m2) | 1 | 1 | 1 | 2 | 2 | 3 |
| Filter area(m2) | 3 | 3 | 3 | 5 | 5 | 6 |
| Slag gate diameter(mm) | 800 | 800 | 1000 | 1000 | 1000 | 1000 |
| Steam consumption(kg/h) | 245 | 325 | 345 | 645 | 720 | 850 |
| Stirring speed(r/min) | 25~40 |
SERVICE
We have established some overseas agent office to make the after-sales serivce already ,so it can will be service client in fast response .also in our headquarter service team ,there is a expert team which can support client in 7*24 hours .
1. Customer inquiry and consultation (URS documents)
2. Confirmation of treatment plan (DQ documents &PID Drawing)
3.Quotation offer with the technology document (Quotation PI )
4.Engineering and Manufacturing (Production &Quality inspection )
5. Product inspection (FAT documents)
6. Delivery arrangement and loading work (full set Shipment documents)
7. After-sales service (OQ,PQ ,SAT documents)
FAQ
1.What about your factory?
Our factory is located in Wenzhou city ,Zhejiang Province and have more than 15 years experience on machinery making.
2.How will your company control the equipment quality ?
We have a qualified expert team ,we will inspect every production proceed .also Machines will be tested in our plant before shipment .
3.How long the warranty will be?
We provide 1 year warranty for the machine running ,but we will afford whole -life service for the machine .
4.Which kind payment do your company do now ?
We accept Western Union, T/T ,D/P,D/C and irrevocable L/C payable etc.
5.Can we become your distributor in our country?
Yes, we very welcome you! More details will be discussed if you are interested in being our agent.
6.Why we choose "JOSTON "?
1. We enhance the reliability of product's quality and working life .
2. We decrease the consumption cost of the product in the running.
3. We improve research personnel's ability to deliver a creative design;
4. We use leading technologies in our product development and innovation, and thereby increase the competitive advantage of products.
7.Do you supply installation equipment in oversea?
Yes, if need, we can send our engineer to your plant to help you do installation and commission.
8.How can we know the order production status ?
We will arrange the person to take photo or video during manufacturing in every week to make you to know the production status.When goods are finished,we will take detailed photos or video for your checking ,after approve ,then we will arrange shipment .also you can arrange FAT in our plant when the goods is ready here
9.what is kind service do you offer before making order ?
1.according to your company URS ,we will make the design drawing accordingly.
2.after your company approved drawing ,we will make quotation.
3. final we make agreement on payment terms ,delivery time ,package ,shipment etc.
10.how about your company after-sale service ?
1. We provide long-term after-sale service.
2. we can do installation and commission for the equipment in your plant if necessary .
3. Meanwhile, you can call or e-mail us to consult on any relevant question since we have a special line for after-sale service. Alternatively, you can communicate on-line with us to solve any problem.
Complaint
