Description
TengYiDa Sand Rotary Dryer Sand Rotary Dryer Main Features1. The inner part of the sand dryer is made of wear-resistant manganese plate, which is 3-4 times more wear-resistant than ordinary steel plate.
2. Compared with the traditional single drum dryer, the thermal efficiency is increased by more than 40%.
3. The floor area is small, which is about 60% less than that of single drum dryer, and the geotechnical investment is reduced by 60%.
4. There is no air leakage phenomenon, and the sealing difficulty is completely solved.
5. The discharge temperature is less than 60 ºC, it can be directly fed into the warehouse without cooling.
6. The initial moisture content of the material is 15%, and the final moisture content after drying is less than 0.5-1%, which is the first choice for drying engineering such as dry and wet mortar production line.
Sand Rotary Dryer ApplicationThe rotary dryer is suitable for sand drying, such as mineral sand, quartz sand, river sand, yellow sand, sea sand, pomegranate sand, machine-made sand, dry powder mortar, water slag, mountain sand, weathered sand, etc. It is widely used in many industries such as construction, building materials, casting, smelting, chemical, cement, medicine and minerals. pon of TE NG YDescription of TE
NGYIDA Three Cylinder Dryer IDA Three Cylinder DryPerformance Characteristics 1. Low outlet air temperature, longer service life of dust removal equipment. 2. Sizes of lump materials, particles, and powders are less than 20mm can be dried. 3. Gear driving is not required and it's directly driven by roller, with higher mechanical efficiency. 4. Without the phenomenon of air leakage, the sealing difficulty is totally solved, and the installation can be finished within a few hours. 5. 50% of area covers has been reduced compared with the single drum dryer, and land investment reduced by 50%, power consumption reduced by 60%. 6. The self-insulation thermal efficiency of three-cylinder dryer can reach above 70% (the self-insulation thermal efficiency of traditional single drum dryer is only 35%), it has remarkable energy saving effect. 7. Final moisture indicators can be regulated easily according to the request. 8. Less than 1% of material moisture can be assured by the three-cylinder dryer, which is the preferred product for the dry mixed mortar and slag powder production line. 9. The temperature of discharged material is < 50 ºC, which can be directly conveyed into the storage silo, needless to cool down in the cooling shed.Sand Dryer Working PrincipleThe raw material, sand, is conveyed to the inner cylinder by the feeder continuously and evenly , and is thrown and pushed forward by the spiral lifting board. In addition, it is dispersed by the intermediate dispersing device to form a curtain which fully contacts with the heat. The water evaporates rapidly then led out induced draft fan. Semi-dry material enters the middle cylinder and outer cylinder, and then fully contacts with the heat finally enters the discharge bin after meeting the final drying requirements.Applications
Powder& particle: Sands,limestone,stones,clay,mineral filter cake,coal,iron sulphate,filter cakes,fly ash,gypsum etc.
Damp and sticky material:Coal slime,sewage sludge,bentonite,Kaolin etc.
Corrosive material: Fertilizer,animal dung,slag etc. Advantage1.Compared with the single-drum dryer, the length of the machine is shortened by 50%, which is advantageous to the process layout, reducing the building area and saving about 40% project investment.
2. Multiple Heating Source. Customers can choose the heating source according their situation, we can design the customized solutions.
3. The system is equipped with control system, with a high degree of automation and simple operation.
4. The system has a unique sealing structure, no thermal energy leakage.
5. Use the best quality parts, make sure the safe and reliable operation.
The structure we designed is advanced and compact.
According to your site and capacity, we can provide you reasonable design with factory price.
Our professional installation team has rich experience to complete the installation, commissioning fast, and also to train workers how to operate, maintain the equipment.
As a professional and highly experienced manufacturer of dry mortar mixing equipment, rotary dryers and kiln, grinding mill equipment, building materials processing equipment in China for more than 20 years. We are in the leading position in this scopes.
Packaging
1, HS code can be supplied to you for checking importing tax in your country.
2, Standard export packaging by container, which should be applicable to international requirement.
3, Big size equipment will be fixed by steel wire, while small ones together with spare parts will be packed into wooden boxes.
Shipping
Usually by sea, sometimes by land, air.
Delivery time: 15-30 days after deposit arrived
1. Pre-sale services:
Act as a good adviser and assistant of clients
(1) Select equipment model;
(2) Design and manufacture products according to clients' special requirement;
(3) Train technical personnel for clients;
2.Services during the sale:
Respect clients; considering every aspect and details for our customers
(1) check products ahead of delivery;
(2)keep costumers informed about the delivery process
3. After-sale services
We promise excellent after-sale service!
(1) Assist clients to prepare for the first construction scheme;
(2) Install and debug the equipment;
(3) Train the first-line operators on site;
(4)Take initiative to eliminate the troubles rapidly at site;
(5)Provide maintenance for big items.
And other rational requirement brought up by our clients.
Complaint
