Complaint
--MgO decorative panel takes biomass plant fiber as reinforcement material, magnesium oxide, magnesium phosphate or magnesium chloride or magnesium sulfate and water ternary system, scientific formula and modification, light material as filler and plate made by mechanical rolling as substrate; After special thermosetting amino resin impregnated paper, it is formed by single-layer or multi-layer double-sided hot pressing veneer. There are many kinds of plates with high simulation colors, which can be further processed into MgO decorative panels of floor, wallboard and roof.
--MgO decorative panel can release negative oxygen ions, and the induced amount of air negative ions is 696 / s · C m2; Nano silver ions can be added to the surface, which can kill a variety of bacteria, and have antibacterial effect on Escherichia coli, Staphylococcus aureus and other bacteria, with an effective antibacterial rate of 99.99%; It has certain formaldehyde purification effect, and the formaldehyde purification rate is 31.7%.
| Laminated Wall Board Standard Indicators | |||||
| No. | Item | Unit | China National Standard | Fandeng Standard | |
| 1 | Static bending strength | Mpa | ≥35.0 | ≥38.0 | GB/T 17657-2013 4.7 |
| 2 | Internal bonding strength | Mpa | ≥1.0 | ≥1.2 | GB/T 17657-2013 4.11 |
| 3 | Moisture content | % | 3.0-10.0 | 6.0-8.0 | GB/T 17657-2013 4.3 |
| 4 | Density | g/m³ | ≥0.85 | ≥1.25 | GB/T 17657-2013 4.2 |
| 5 | Water absorption thickness expansion rate | % | ≤18 | ≤1 | GB/T 17657-2013 4.4 |
| 6 | Surface bonding strength | Mpa | ≥1.0 | ≥1.1 | GB/T 17657-2013 4.16 |
| 7 | Dimensional stability | % | ≤0.9 | ≤0.3 | GB/T 17657-2013 4.33 |
| 8 | Formaldehyde emission | mg/m³ | ENF:≤0.025 | ≤0.017 | GB 18580-2017 |
| EO:≤0.5 | |||||
| EI:≤1.5 | |||||
1.What is the lead time?
It takes 4 weeks to get the MGO cement products fully cured.The cement products can still go curing in the containers if we ship them less than 4 weeks, but the curing condition on the ocean is not under control, which will effect the quality of the products. We strongly suggest you take the curing time into consideration when you place orders.
2.Can you make products as per our requests?
Of course, we accept OEM/ODM
3.What is your packaging?
Plywood plywood / or solid wood pallet
4.What is your payment term?
We arrange the production upon receiving your deposit by T/T. By TT or LC.
5.How about the samples?
Free samples with shipping cost.
