MODEL (PW Series) | HV Model | |||
PW8-12KW HV(230Vac) | ||||
Line Mode Specifications: | ||||
Input Voltage | Input Voltage Waveform | Sinusoidal (utility or generator) | ||
Nominal Input Voltage | 230Vac | |||
Low Line Disconnect | 184Vac±4% | |||
Low Line Re-connect | 194Vac ±4% | |||
High Line Disconnect | 263Vac±4% | |||
High Line Re-connect | 253Vac±4% | |||
Max AC Input Voltage | 270Vrms | |||
Input Frequency | Nominal Input Frequency | 50Hz/ 60Hz (Auto detection) | ||
Low Line Frequency Re-connect | 51+0.3Hz for 60Hz; 41+0.3Hz for 50Hz; | |||
Low Line Frequency Disconnect | 50+0.3Hz for 60Hz; 40+0.3Hz for 50Hz; | |||
High Line Frequency Re-connect | 64+0.3Hz for 60Hz; 54+0.3Hz for 50Hz; | |||
High Line Frequency Disconnect | 65+0.3Hz for 60Hz; 55+0.3Hz for 50Hz; | |||
main functions | Output Voltage Waveform | As same as Input Waveform | ||
Over-Load Protection (SMPS load) | Fuse | |||
Output Short Circuit Protection | Fuse | |||
Transfer Switch Rating | 63A/80A/100A | |||
Max Bypass Overload Current | 100A | |||
Battery Invert Mode Specifications: | ||||
output | Output Voltage Waveform | Sine wave | ||
Rated Output Power (KW) | 8kw/10kw/12kw | |||
Power Factor | 0.9~1.0 | |||
Nominal Output Voltage (V) | 230Vac ±10% rms | |||
Nominal Output Frequency (Hz) | 60Hz ± 0.3Hz 50Hz ± 0.3Hz | |||
DC Voltage | Nominal DC Input Voltage | 48V/72V | ||
DC Voltage range | 40-62Vdc for 48VDC/ 70-93Vdc for 72VDC | |||
Low Battery Alarm | 42.0Vdc ± 1.2Vdc for 48V battery 63.0Vdc ± 1.8Vdc for 72V battery | |||
Low DC input Shut-down | 40.0Vdc ± 1.2Vdc for 48V battery 60.0vdc± 1.8Vdc for 72V battery | |||
High DC input Alarm & Fault | 64Vdc ± 1.2Vdc for 48V battery 96Vdc ± 1.8Vdc for 72V battery | |||
High DC input Recovery | 62.0Vdc ± 1.2Vdc for 48V battery 93.0Vdc ± 1.8Vdc for 72V battery | |||
Charger | Nominal Charge Current | 35A/50A(5 stages adjustable charging current) | ||
Charge Current Regulation | ± 5Adc | |||
Over Charge Protection | Bat. V ≥62Vdc / 93Vdc, beeps 0.5s every 1s & fault after 60s | |||
Algorithm | Three stage: Boost CC (constant current stage) → Boost CV (constant voltage stage) → Float (constant voltage stage) | |||
Efficiency | Efficiency (Battery Mode) | ≥85% | ||
Efficiency (Line Mode) | >98% | |||
Transfer Time | Ac to Dc | 20ms (Max) | ||
Dc to Ac | 15ms (Max) | |||
System parameter | Over-Load Protection | 110% <load<150%, beeps 0.5s every 1s, and Fault after 60s off the output, Load>150%, beeps 0.5s every 1s, and Fault after 20s. | ||
Output Short Circuit Protection | Current limit (Fault after 10s) | |||
Surge rating (10s) | 1:3 (VA) | |||
Power saver | Load <=25W (Enabled on "P/S auto" setting of Remote control) | |||
Protections | Low battery, over charging, over load , over temp. | |||
Indicators | LED+LCD Display | |||
General Specifications | Operating Temperature Range | 0°C to 40°C | ||
Storage temperature | -15ºC ~60ºC | |||
Operation humidity | 5% to 95%(non-condensing) | |||
Audible Noise | 60dB max | |||
Cooling | Forced air, variable speed fan | |||
Dimension(L*W*H) | 538*255*630mm | |||
Net weight(Kg) | 8KW | 10KW | 12KW | |
60kg | 65.5kg | 71kg |