2023 New Type Shell &Tube Heater or Cooler in Food Industry

Min.Order: 1
Product origin: Guangzhou, Guangdong, China
Infringement complaint: complaintComplaint
US$ 800 ~ 950

Description
The shell-and-tube heat exchanger is composed of a casing, a heat transfer tube bundle, a tube sheet, a baffle (baffle), and a pipe box. The housing is mostly cylindrical, and a tube bundle is installed inside, and both ends of the tube bundle are fixed on the tube sheet. 
The two types of hot and cold fluids that perform heat exchange, one flowing in the tube, called the tube-flow fluid, and the other flowing outside the tube, called the shell-side fluid. In order to increase the heat transfer coefficient of the fluid outside the tube, a number of baffles are usually installed in the housing.

 
Tube structure of shell and tube heat exchanger



Advantage
 

1. Simple structure, easy increase and decrease of heat transfer area.  Because it is composed of standard components, no additional machining is required for installation.  

2. High heat transfer efficiency.  It is a pure countercurrent heat exchanger, but also can choose the appropriate section size, in order to improve the fluid speed, increase the heat transfer coefficient of the fluid on both sides, so its heat transfer effect is good.  Liquid-liquid heat transfer, the heat transfer coefficient is 870 ~ 1750W.  This is particularly suitable for high pressure, low flow, low transmission...  

3. The structure is simple, work to adapt to the scope is big, the heat transfer area is more or less convenient, on both sides of the fluid can improve the flow velocity, the heat transfer surface on both sides can have higher heat transfer coefficient, is a unit of heat transfer surface metal consumption, to increase the heat transfer area, improve the effect of heat transfer, can provide various forms of fin, tube wall, and added a blown film, tube disturbance device.

4. Can be arbitrarily changed according to the installation position, easy to install.  



 



 

Food grade stainless steel shell and tube heat exchanger

Profile typeTuber exchanger
MaterialSS304 or SS316L
Capacity0.1T/H-100T/H (Customized)
Working pressure0.8Mpa(Customized)
Heating Area/Cooling Area0.1~20M2
The Diameter of PipeΦ6/Φ9/Φ12/Φ16/Φ19/Φ25mm
Inlet OutletΦ19~ Φ219mm

1. Tuber exchanger is the equipment that can transfer certain heat from the thermal fluid to the cold fluid. It is the essential equipment to achieve heat exchange and transfer during the production process. 

2. Tuber exchanger is mainly used for heating and cooling treatment of material during production in the pharmaceutical industry. Chemical industry, food industry, light industry etc. The lined pipe heat exchanger can be made of SS304/316 etc.

3. Heat exchanging pipes can be naked pipes or spiral pipes, and the minimum size ca be Φ12x1. The connection between pipes and plates can be welding, expanding connecting, or expanding and welding. It also can be designed and produced according to customer various requirements.





 

1. Simple structure

2. High heat transfer efficiency

3. The structure is simple,

4. Easy to install.  

 

 


Selection features:
  • 1). Determine the required heat exchange area according to the known flow rates of cold and hot fluids, the initial and final temperatures, and the specific heat capacity of the fluid.
  • 2). When selecting a heat exchanger, pay attention to the pressure level, the operating temperature, and the connection conditions of the interface. Under the premise of pressure drop and installation conditions, the shell-and-tube heat exchanger can be used to increase the heat exchange capacity by using a lengthening type with a small diameter.
  • 3). The pressure drop of the heat exchanger should not be too large, generally controlled between 0.01 and 0.05 MPa;
  • 4). The flow rate should take into account the viscosity of the fluid, the flow rate of the viscosity should be less than 0.5 ~ 1.0m / s; the flow rate in the general fluid tube should be 0.4 ~ 1.0m / s;

Q&A
1. Q: How long can we deliver goods?
A: It would be 15-25 days after payment and drawing sketch confirmed

2. Q: Can your company supply an after-sales warranty?
A: Yes, we can supply 1-year after-sales warranty against B/L date.

3. Q: What payment terms can you accept?
A: We can accept L/C, T/T, etc.

4. Q: Can you accept customized order?
A: Yes, we accept, we have a very professional technical group who can design the special products according to your basic parameter/ data sheet/ drawings or sample.

5. Q: Do you have your own factory or just you are a trading company?
A: We are the direct factory group, one is in Guangzhou City, Guangdong Province, another is in Huanggang City, Hubei Province.

6. Q: Is OEM order acceptable to your company?
A: Yes, OEM is Welcomed.

7. Q: What kind of equipment used for manufacturing process?
A: A series of high-tech equipment used in the process of manufacture, including special hydraulic machine for plate heat exchanger, CNC automatic cutting machine, automatic wheat arc welding machine, automatic plasma welding machine, CNC plate winding machine, shearing machine and etc. 
 
8. Q: What are certificates and soft power used in manufacturing process?
A: Tranp has obtained ISO9001 certification, CE certification, standardized enterprise certification and various utility model patent certificates, with professional engineering and technical personnel engaged in the design of heat exchange equipment, thermal system and environmental recovery system. We will help customers to qualify CE certificates or other foreign certificates in different area all over the word.

9 .Q: What material and standards used for products?
A: All the products are manufactured as per national standards,including TSG21-2016, NB/T47004-2009, GB150.1-4-2011, GB/T151
2014, GB/T14296-2008 and etc. 

10.Q: What is quality inspection procedure to maintain product quality?
A: Tranp has provided professional inspection regulation for Final quality controls for all products, to strictly control the quality of products from our warehouse. 




 About Warranty:

We promise 1 year guarantee, all reasonable relevant cost will be undertaken by us in the first year if our heat exchanger fails to work due to quality problem, only the free repairing operation guide  is available in the rest of the 9 years via E-mail /Fax/Phone

 

Company profile:



Scroll to Top