Ultrasonic Harness Welder Welding Wire Butt Joint Ultrasonic Metal Welding Machine

Min.Order: 1
Product origin: Wuxi, Jiangsu, China
Infringement complaint: complaintComplaint
US$ 12000

Description
Product Description
Ultrasonic Welding Principle:Ultrasonic metal welding machine use ultrasonic frequency vibration principle to change ultrasonic vibration energy into friction energy and transfer to the metal surface to be welded ,while the friction produces heat under the pressure, the metal structure of molecules fully activation of the fusion between the molecular layer of the formation of the new equipment.
Ultrasonic spot welding is a well-developed and established production method for joining non-ferrous metals. Especially in the automobile industry, this reliable and trend-setting technology has been used in the production of wire harnesses for decades now. Ultrasonic metal welding is a cold, friction welding process, i.e. no liquid-melt phase occurs. The parts being joined are rubbed together at their contact surfaces under slight pressure.
The advantages of the machine;
△The welding is firm and reliable,and the resistance after welding is very small or close to zero,and the conductivity is good
△Equippde with high-performance ultrasonic metal spot welding power source,automatic tracking of transducer frequency with two control modes of time and energy
△Low requirements onthe terminal surface,no need to scrape off the oxide layer or electroplating layer
△The welding material does not need to be melted,does not change the material characteristics,and has no pollution
△It can realize welding between dissimilar metal,such as nickel+copper,copper+aluminum,nickel+aluminum,etc.
△The welding time is short,without any flux,shielding gas and filler

Application area
* Multi-layer positive and negative electrode welding for dynamic power battery
welding material does not melt, non-fragile metal properties.
* Li-ion battery and polymer battery: Copper foil welds nickel sheet; Aluminum foil welds aluminum sheet; Aluminum foil welds
Nickle sheet.
* Auto splice welding, Formation of electric wire end, Welding for electric wires; Multiple electric wires bond welding.
* Electric wire and cable welding, terminal , connector , electric parts welding .
* Solar panel battery, flat solar plate , copper and aluminum plate joints.
* Solenoid switch, fuseless switch: big currency joint point welding and dissimilar metal welding.
* Refrigerator and air conditioner copper tube sealing. Vacuum parts of copper tube and aluminum tube sealing.
In addition, advances in metals technology are producing thinner and lighter metal foils and wire for use in sensitive electronics and other products. Ultrasonic metal welding can satisfy the clean and delicate requirements of these applications, whereas traditional welding methods may be much too destructive.
Ultrasonic welding also meets the reliability demands of larger, heavy-duty applications such as charging systems for electric vehicles, wind power towers and solar energy systems.

Technical parameters

Our customers

Packing&shipping

 

Our service
★ Provide customized service
★ Consulting technical customer service
★ Customers send samples
★ Send preliminary test welding back for confirmation
★ Receive deposit and start production

★ Delivery after installation
★ Power and wire connected,start production immediately


Contact us
Scroll to Top