Close Cell Blend Polyol and Isocyanate Polyurethane PU Foam Material

Min.Order: 1

Product origin: Yantai, Shandong, China

Infringement complaint:

Complaint

US$ 1500 ~ 3500

Description

Blend Polyol SD1236
Building Wall Spray Rigid PU Foam
DESCRIPTION
SD1236 building wall insulation system blend polyol is a kind of spray rigid PU foam blend polyol, specially used for the insulation of building external wall. It used together with isocyanate(PM-200) to make rigid PU foam through PU spray machine. The foam produced has the characteristics as following:

The strong adhesive force, convenient construction and no seams.
The low thermal conductivity, low water absorption and good dimensional stability.
The long service life.

TYPICAL PHYSICAL PROPERTIES

Physical Properities		Test Method	Metric	Value
Core Density		GB/T 6343-2009	kg/m³	35.5
Compressive Strength		GB/T 8813-2008	kPa	215
Tensile Strenght		GB/T 9641-88	kPa	234
Oxygen index		GB/T 2406.2-2009	%	23.1
Initial Thermal Conductivity		GB/T 10294-2008	W/(m·K)	0.022
Close Cell Content		GB/T 10799-2008	%	≥88
Water Absorption		GB/T 8810-2005	%	≤3
Dimensional Stability(Foam made After 6 days)	-25ºC	GB/T 8811-2008	%	≤±1 ≤±1
	70ºC

Importance: The above mentioned are typical test values, and the specific data may vary slightly due to environmental conditions.For our products, the data are not legally binding.

PACKING SPECIFICATION
220KGS/Drum, Blue paint or Zinc coating drums (Drum Weight: 18-23kg)
STORAGE RECOMMENDATIONS
Direct contact with SD1232 type blend polyol can lead to moderate eye irritation and mild skin irritation, which can cause skin allergies. Repeated inhalation of high concentration of volatile gas will cause respiratory allergy, and should be treated immediately. Anti- inflammatory and anti-allergic treatment measures should be taken.
Please be careful in the operation to prevent contact with the skin and splash into the eye, please wear the necessary protective equipment (gloves, protective goggles, working clothes, etc.).
Once splashed on the skin or the eye, rinse with water immediately for at least 15 minutes, and the skin is washed with soapy water. Please seek medical treatment immediately after swallowed.

Notice: This product specification is intended to be used by Shunda Polyurethane Company in order to show sincerity to our customers, while it is not covered by law as a guarantee. Customers can adjust according to the actual operating conditions. If you have any questions, please call our company and we will serve you wholeheartedly.

Forward

Related products