Theaoson Fast Drying Anti-Corrossive Acrylic Resin Metallic Gold Aerosol Spray Paint

THEAOSON Fast Drying Anti-Corrossive Acrylic Resin Metallic Gold Aerosol Spray Paint

Theaoson spray paint is composed of aerosol cans, aerosol valves, paints, and propellants. It isusedin a wide range of applications: repair of paint enamels, molds, industrial machinery, buildings,steel structures, advertising, logos , graffiti and so on

Features
1.Fast drying
2.Colorful and easy to use
3.Full paint film and high gloss

Application
Suitable for metal, wood, clay bricks, glass, asbestos tiles, plastics, ceramics and other materials. Due to the diversity of materials during the specific construction, a small-scale test spraymust beperformed first, and no large-scale construction can be conducted after no adverse reactions.

Instructions

Construction environment:

Remark: the best material liquid temperature is +20 ºC , environment humidity less than 60%; If the temperature and humidity exceed the specified range, the temperature and humidity should be reworked within the suitable range.
Substrate preparation
Thoroughly remove oil, dust, and water stains from the spray area before use. If necessary, grind or prime the substrate.

Usage
1.Shake well the can about two minutes before use to ensure that the paint is evenly mixed; 
2.First spray on a small area of the test panel to confirm the accuracy of the selected color;
3.From 15 to 30cm away from the surface of the object to be sprayed, use a forefinger to press the spray head back and forth;
4.When a small amount of liquid remaining cannot be ejected, rotate the nozzle 180° and spray it again.
5.If it is not sprayed once, put the paint can upside down before storing it, press down on the spray head for about 3 seconds, clear 
the spray head to prevent the nozzle from sticking.

Finishing work:
1.After spraying, the sample should be placed in a clean and ventilated environment for about 12 hours;
2.If not sprayed, the remaining material must be stored at room temperature and protected from light.

Technology Specification
 

Remark: all the above data are obtained according to BB/T 0047-2007 "aerosol paint" standard, our laboratory test results. The test results depend on external conditions, use methods and tools. In order to achieve better use effect, it is recommended to strictly follow the method ofuse.
The solution of normal problem
1. Paint film whitening: it is recommended to avoid the following day after rain (especially high temperature and wet weather) and continuous rain.
2. Shut up: shake evenly and spray for 3 seconds or change nozzle.
3. Spray up: low temperatures suggest using 50  ºC warm water to heat up, one-time finish spray, spray avoid angle 45 degrees;
4. Flow: use the correct spraying distance (15-25cm) and spray movement speed (30-60cm/s) to avoid a thick spray.
5. Bite bottom: remove the bottom part of the bite, fill the bottom ash, and then spray the paint after the coating is dry and flat.
Attention
Keep away from children, please work in the air. If swallowed, you should immediately cause vomiting and seek medical advice.
Spray must be kept in aerosol cans are vertical and horizontal angle of no less than 45  °. Flammable, pressure vessel, do not use near fire source.
The weight changes over time, which is normal, and the attrition rate is less than 2% per year.


 

Why choose us:
Theaoson is a listed company founded in 2010. We are one of the largest aerosol manufacturer in China and we are listed company. We dedicated to research, development, production and sales to aerosol in car care, beauty care, household, industries and disinfection.

Please allow me to have a brief introduction to the advantages of our aerosol products:

1. The factory environment is as beautiful and modern as gardens.
2. Area: 120,000 square meters. Located in Fine Chemical Science Park which is according to Chinese government's requirement for the chemical production base.
3. We mainly focus on aerosol in car care, beauty care, household, disinfection and industrial aspects.
4. Yearly output: 300 million cans. Lead time for new orders is 20-25 days, for repeated orders is 18-20 days.
5. Equipped with 25 world-leading production lines and professional testing instruments imported from Germany.
6. Adopt the advanced 6S lean management and the "five practice" of corporate cultureand management philosophy.
7. Team: R&D, QC and production teams are 24 years of industry experience.
8. Certificates: "Top 100 Enterprises in Guangdong Province" "AEO Advanced Certificate" "Production License for Dangerous Chemical Products", "Sanitation License for Disinfection Products", "Guangdong Pollutant Discharge Permit", CE, SGS, ISO9001, ISO14001, ROHS, etc.