Complaint
| Product Details | |
| Product name | UNS N08810 Incoloy Alloy Incoloy 800H 1.4958 Nickel Based Alloy Seamless Pipe |
| Brand name | ABOOM |
| Standard | ASTM A312, ASTM A554, ASTM A790, EN10216-5, EN10217-7, JIS G3468, JIS G3459 |
| Material | N08367 Al-6XN 1.4501 Incoloy25-6hn NAS 255NM |
| Surface | Pickling, 400grit polishing, 600grit polishing, mirror finish |
| Certificate | BV, LR, GL, NK, RMRS |
| Packing | In bundles with waterproof material, in wooden cases |
| Shipment | By sea, by air, by express |
Material designation: Incoloy 800H nickel based alloy
German grade: X2NiCrAlTi3220
US grade: NO8810
Incoloy 800H (NO8810) nickel-based alloy applications:
Incoloy 800H (NO8810) alloy chemical industry, nuclear generator, acetic anhydride cracking tube, heat exchange equipment, heat exchange tube, etc.
Incoloy 800H (NO8810) nickel-based alloy mechanical properties: see Table-1:
Table-1
| Temp ºC | σЬ/ MPa | σ0.2 / MPa | δ5 /% |
| 100 | 425 | 140 | 160 |
| 300 | 390 | 95 | 115 |
| 500 | 360 | 80 | 100 |
| 600 | 300 | 75 | 95 |
Incoloy 800H (NO8810) nickel-based alloy melting temperature range: 1350 ~ 1400 ° C.
Incoloy 800H (NO8810) nickel-based alloy specific heat capacity: 455J / (kg · ºC).
Incoloy 800H (NO8810) nickel-based alloy density: 8.0 g / cm3.
Incoloy 800H (NO8810) nickel-based alloy Magnetic: None.
Incoloy 800H (NO8810) alloy hot working:
(1) The temperature range is 1200 ºC ~ 950 ºC. The cooling method is water quenching or rapid air cooling.
(2) In order to obtain the best performance and creep resistance, a solution treatment should be performed after hot working.
(3) The material can be directly fed into a furnace that has been heated up to 1200 ° C, and it can be quickly released after holding for a sufficient time, and thermal processing is performed within a specified temperature range. When the material temperature drops below the hot working temperature, reheating is required.
specification:
Outer diameter Φ6-762mm; wall thickness: 0.5-50mm, maximum length 18000mm
Special specifications are available upon negotiation.
2.
| Chemical Composition(%) | |||||||||||
| Grade | C | Si | Mn | P | S | Cr | Ni | Mo | N | Cu | |
| 201 | ≤0.15 | ≤0.75 | 5.5~7.5 | ≤0.060 | ≤0.03 | 16.00~18.00 | 3.5~5.5 | - | - | 0.08 | 1.5 |
| 202 | ≤0.15 | ≤1.00 | 7.5~10.00 | ≤0.060 | ≤0.03 | 17.00~19.00 | 4.0~6.0 | - | ≤0.25 | ||
| 301 | ≤0.15 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 16.00~18.00 | 6.00~8.00 | - | |||
| 302 | ≤0.15 | ≤1.00 | ≤2.00 | ≤0.035 | ≤0.03 | 17.00~19.00 | 8.00~10.00 | - | |||
| 304 | ≤0.07 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 18.00~20.00 | 8.00~10.50 | - | |||
| 304L | ≤0.030 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 18.00~20.00 | 9.00~13.00 | - | |||
| 310S | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 24.00~26.00 | 19.00~22.00 | - | |||
| 316 | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 16.00~18.00 | 10.00~14.00 | 2.00~3.00 | |||
| 316L | ≤0.03 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 16.00~18.00 | 12.00~15.00 | 2.00~3.00 | |||
| 321 | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 17.00~19.00 | 9.00~13.00 | - | |||
| 430 | ≤0.12 | ≤0.75 | ≤1.00 | ≤0.040 | ≤0.03 | 16.00~18.00 | - | ||||
| 2205 | ≤0.03 | ≤1.00 | ≤2.00 | ≤0.030 | ≤0.015 | 22.00~23.00 | 4.5~6.5 | 2.5~3.5 | |||
| 2507 | ≤0.03 | ≤0.08 | ≤1.20 | ≤0.035 | ≤0.015 | 24.00~26.00 | 6.00~8.00 | 3.0~5.0 | |||
| 904L | ≤0.02 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.035 | 19.00~23.00 | 23.00~28.00 | 4.0~5.0 | 1.0~2.0 | ||
| INCONEL 028 | ≤0.03 | ≤1.00 | ≤2.50 | ≤0.030 | ≤0.030 | ≤28.0 | ≤34.0 | ≤4.0 | ≤1.4 | ||
| MONEL 400 | ≤0.30 | ≤0.5 | ≤2.00 | - | ≤0.024 | - | ≥63.0 | - | ≤34.0 | ||
| INCONEL 800 | ≤0.10 | ≤1.00 | ≤1.50 | - | ≤0.015 | ≤23.0 | ≤35 | 4.0~5.0 | - | ≤0.75 | Ti≤0.6 Al≤0.6 |
| Packaging Detail | Each tube is loaded into plastic bag individual, and then several pieces were wrapped in one bundle |
| Delivery Time | 30 days |
