Complaint
ABS is a terpolymer of three monomers: acrylonitrileA), butadiene (B) and styrene (S). The relative content of the three monomers can be changed at will to make various resins. ABS plastic has the common properties of three components. A makes it resistant to chemical corrosion, heat resistance, and has a certain surface hardness, B makes it have high elasticity and toughness, and S makes it have the processing and molding characteristic of thermoplastics and improve electrical properties. performance. Therefore, ABS plastic is a kind of "tough, hard and rigid" material with easy-to-obtain raw materials, good comprehensive performance, low price and wide range of uses.
Properties:
1.Stable shrinkage, good dimensional stability, low warpage
2.Good processability
3.Balance mechanical properties
4.Good exterior, no need to be plated, sprayed
5.Flame resistant
| Item | Typical Characteristic | Typical Characteristic | Testing Standard |
| Density | 1.2g/cm3 | 1.17-1.27g/cm3 | ASTM D-792 |
| Glass Fiber | 15% | 33% | --- |
| Melt Flow Rate | 60g/10min | 35g/10min | ASTM D-1238 |
| Molding Shrinkage | 0.4-0.7% | 0.4-0.6% | ASTM D-955 |
| Water Absorption | % | % | ASTM D-570 |
| Tensile Strength | 43MPa | 40MPa | ASTM D-638 |
| Flexural Strength | 71MPa | 60MPa | ASTM D-790 |
| Elongation at break | 18% | 15% | ASTM D-638 |
| Flexural Modulus | 2400MPa | 2100MPa | ASTM D-790 |
| Melting Point | 255ºC | 265ºC | ASTM D-789 |
| Vicat Softening Point | 85ºC(1000g) | 80ºC(1000g) | ASTM D-1525 |
| Flame Retardant | V0(1.6mm) | V0(1.7mm) | UL 94 |
ABS resin largest application areas are the automotive, electronics and building materials.
The automobile industry: Automotive instrument panels, exterior body panels, interior panels, steering wheel, panels, door locks, bumpers, ventilation tubes etc.
Electrical aspects: Widely used in refrigerators, televisions, washing machines, air conditioners, computers, copiers and other electronic appliances.
1.Packing:
In 25kg PP woven bag, or per your requirement.
17-17.5mt/20'FCL 24-24.5mt/40'FCL
2.Storage:
The resin should be stored in a drafty, dry warehouse and away from fire and direct sunlight. It should not be piled up in the open air.
3.Transportation:
During transportation, the product should not be exposed to strong sunlight or rain and should not be transported together with sand, soil, scrap metal, coal or glass. Transportation together with toxic, corrosive and flammable substance is strictly prohibited.
