Complaint
Flotation machine is an indispensable flotation device in modern mineral processing technology. This device can be used to sort various ores by flotation. It is widely used in non-ferrous metals such as copper, lead, zinc, nickel, molybdenum, gold, etc. Rough selection, selection and reverse flotation of non-metallic minerals. It has the advantages of convenient adjustment of ore surface, high flotation precision, no environmental pollution, low energy consumption, and strong adaptability.
The flotation machine is driven by motor v-belt drive to drive the impeller to rotate, which causes the centrifugal effect to form negative pressure. On the one hand, sufficient air is inhaled to mix the slurry and the slurry.Adjust the height of the gate and control the liquid level so that the useful foam is scraped out.
It can be combined with other equipment (such as SF) for better effect
Mechanical stirring, simple operation and control, convenient adjustment
Wearing parts have a long service life
High flotation efficiency and low energy consumption
The slurry in the groove is carried out in the upper and lower double circulation according to the fixed flow mode, which is conducive to the suspension of coarse minerals
The clearance between the impeller and the cover plate is large, and the influence on the inspiratory amount is small
The impeller has a low circumference speed, is not easy to wear and has a long service life
Capable of self-suction air pulp, no need for foam pump
Able to adapt to complex processes, wide application, stable indicators, etc
It can handle coarse grain and high density ore
Strong stirring power and low pharmaceutical consumption
Easy wear parts have light wear and long service life, which requires step configuration
Solid particles can be fully suspended, not easy to sink, good mixing of slurry and gas, and high flotation indexes
Good air dispersion, uniform air bubble distribution and stable foam
Low power consumption and energy saving of 30%-50%
KYF type is dc channel;
The XCF type is the suction tank KYF type power consumption is slightly lower,
The XCF model has a slightly higher power consumption KYF has no self-priming capability and low power,
XCF has self-priming capability and can be placed horizontally
Equipped with automatic control and electric control device of pulp surface, easy to adjust
Reasonable circulation of slurry can reduce coarse sand precipitation to a greater extent
Each tank has three functions of inhalation, pulping and flotation, forming its own flotation circuit without any auxiliary equipment and horizontal setting
Large inspiratory capacity and low power consumption
Category | Model | Effective volume(m³) | Capacity (m³/min) | Impeller diameter (mm) | Impeller RPM (r/min) | Motor power (kW) | Single Weight (t) |
XJK | XJK-0.35 | 0.35 | 0.18-0.4 | 300 | 480 | 1.5+0.75 | 0.6 |
| XJK-0.62 | 0.62 | 0.3-0.9 | 350 | 400 | 3+1.1 | 0.9 | |
| XJK-1.1 | 1.1 | 0.6-1.6 | 500 | 330 | 5.5+1.1 | 1.3 | |
| XJK-2.8 | 2.8 | 1.5-3.5 | 600 | 280 | 11+1.5 | 2.5 | |
| XJK-5.8 | 5.8 | 5-7 | 750 | 240 | 15+1.5 | 3.6 | |
| SF | SF-0.37 | 0.37 | 0.2-0.4 | 300 | 386 | 1.5+0.55 | 0.5 |
| SF-0.65 | 0.65 | 0.3-1.0 | 350 | 336 | 3+1.1 | 1.0 | |
| SF-1.2 | 1.2 | 0.6-1.6 | 450 | 298 | 5.5+1.1 | 1.5 | |
| SF-2.8 | 2.8 | 1.5-3.5 | 550 | 268 | 11+1.5 | 2.3 | |
| SF-4 | 4 | 2-4 | 650 | 237 | 15+2.2 | 2.8 | |
| SF-8 | 8 | 4-8 | 760 | 191 | 30+2.2 | 4.3 | |
| SF-10 | 10 | 5-10 | 760 | 191 | 30+3 | 4.6 | |
| SF-16 | 16 | 6-16 | 850 | 180 | 45+3 | 7.8 | |
| SF-20 | 20 | 8-20 | 730 | 186 | 55+3 | 9.8 | |
JJF | JJF-2 | 2 | 1-3 | 370 | 400 | 11+1.1 | 1.9 |
| JJF-4 | 4 | 2-4 | 410 | 305 | 15+1.5 | 2.3 | |
| JJF-8 | 8 | 4-8 | 540 | 233 | 22+2.2 | 4.5 | |
| JJF-10 | 10 | 5-10 | 540 | 233 | 22+2.2 | 4.9 | |
| JJF-16 | 16 | 5-16 | 700 | 180 | 37+2.2 | 8.2 | |
| JJF-20 | 20 | 5-20 | 730 | 180 | 37+2.2 | 10.5 |
|
|
|
|
|
|
|
|
|
Packaging Detail:Standard containers, bare main machine, motors and small parts are packed in wooden cases.
Delivery Detail:Within 25 days Qingdao,Shanghai,Tianjin and other ports.
Henan Xingyang Mining Machinery Manufactory (in the past is local state-owned enterprises ),the company located in the western of Zhengzhou city,Henan province.
Our company was founded in 1956,subsidiary company have Henan Xingyang Mining Machinery CO., LTD, Tibet Branch, Xinxiang casting plant, Xinxiang processing factory.
-Pre-sale services
Based on the clients' request and budget, we will offer equipment pictures, working site videos, plant processing diagram, assemble drawings, foundation drawings, and plant layout. Clients are welcome to visit our factory, also our equipment working site from former clients. We will arrange cars, hotels and translators for the visiting customers.
-Sale services
Our experienced technicians is available on the phone also the internet, clients can get instance guidance by telephone, email, online service anytime, anywhere. As clients' request, we will send technician to the mine site to guide the installation, trial run test, and training operators until the plant works normally.
-after-sale service.
Equipment spares will be offered with manufacturing cost in at least 10 years since the order is placed. To establish long term cooperation, we will regularly call and email our clients, to check the equipment working condition, offer suggestions for maintenance, and if necessary we will pay a visit to clients to solve the problems caused during equipment working.
