Xf Fluidizing Dryer Used in Chemical Raw Material

Min.Order: 1

Product origin: Changzhou, Jiangsu, China

Infringement complaint:

Complaint

US$ 18000 ~ 38000

Description

XF Series Fluidizing Dryer
Working Principles:
Boiling dryer also known as intermittent fluidized bed dryer. Boiling means that the material will in the state of "fluidizing". Scattered granular wet materials charges into the dryer through the hopper. After filtration, the air goes into the air distribution chamber of the host at the best dry air temperature, distributing by the butterfly valve, passing through the distribution plate at the bottom of the host, contacting with the materials, making the materials "boiling" in the dryer (fluidized state); The "boiling" particles contacts with the hot air sufficiently, completing the process of strong heat and mass transfer. After drying, the material is pumped into the cooling room, cooled by natural cooling, and then discharged. The waste air passes through the inner bag filter then emptying after suction fan.

Product Characteristics:
1.Low drying cost, significant economic benefits.
2.Residence time of the materials in fluidized bed can be adjusted as you need. Lower water content products can be obtained.
3.High thermal efficiency, great dry strength, small footprint, low investment, suitable for a broad area.
4.Completely closed system, negative pressure operation, no dust emissions, good operating environment.
5.Without moving parts (except fan), stable and reliable, simple, easy to operate.
6. Drying and cooling complete in the same equipment. The charge method is Bulk feeding.

Characteristics:
1. Efficiency in energy saving is high. Most heat is provided by the in-bed heat exchanger with the efficiency about 90%, hot air is used mainly to ensure normal fluidization, the quantity of hot air is much less than that needed by conventional fluidized bed; power consumption and heat losses of the exhaust air are accordingly reduced, resulting in higher drying efficiency.
2. As gas flow velocity in the system is lower than that in the conventional fluidized bed, so the material being entrained from the fluidized bed by the air is reduced significantly, the load of the dedusting system is reduced and the environmental protection is improved correspondingly.
3. Use of a special air distributor to prevent material leaking.
4. Easy to install, simple to operate, inexpensive to maintain.

Application:
ethane diacid, calcined soda, table salt, sodium carbonate, sodium sulphate, potassium chloride, nitrate of potash, ammonium chloride, ABS plastic, styrene, ammonium nitrate, ammonium sulfate, calcium chloride, calcium formyl, calcium hypochlorite, calcium sulphate, coal, crystal sugar, diamine phosphate, calcium phosphate, grain porcelain clay, grain fertilizer, hydroquinone, iron sulfate, emulsoid resin, pentaerythritol, potassium carbonate, potassium chlorate, potassium phosphate, potassium tartrate, steel scrap, PVC, sludge, baking soda, sodium bromide, sodium carbonate, sodium chlorate, sodium formate, amylum, terephthalic acid and etc.
1.Inorganic matter: sodium perchlorate, persulphates, sodium perborate, basic nickel carbonate.
2.Organic matter: Aminoguanidine bicarbonate, Hydantoin, 1-chloroanthraquinone, tartaric acid, sodium tartaric acid, potassium tartrate, o-Chlorobenzoic acid.
3.Medicine: sulfadiazine, sulfathiazole, clarithromycin, L-tryptophan, tetracycline, sulfadoxine.
4.Food and feed additives: Oxathiazinone dioxide, feeding chlortetracycline, potassium sorbate, betaine.
5.Dye: red base, Cationic Golden Yellow X-GL, Cationic Red X-GRL, Cationic Blue X-GRRL.
6.Pesticides: chlorpyrifos, glyphosate, phosethyl-Al, tebuconazole, acephate.
7.Chemical Agents: ferrocene, casein.

Technical Parameter:

Parameters	Model No.
Parameters	XF0.25-1	XF0.25-6	XF0.3-2	XF0.3-8	XF0.4-6	XF0.4-8	XF0.4-12	XF0.5-4	XF0.5-6	XF0.5-8	XF0.5-12	XF0.5-16	XF0.5-18
Area of bed layer(m²)	0.25	1.5	0.6	2.4	2.4	3.2	4.8	2.0	3.0	4.0	6.0	8.0	9.0
Drying capacity (kg h2O/h)	10-15	52-75	-30	84-120	84	112-160	168-240	70-100	140-200	140-200	210-300	280-400	315-450
Power of fan (kw)	5.5	22	7.5	37	37	44	66	30	66	66	90	150	165
Temperature of air in(ºC)	120-140	120-140	120-140	120-140	120-140	120-140	120-140	120-140	120-140	120-140	120-140	120-140	120-140
Temperature of air in(ºC)	40-60	40-60	40-60	40-60	40-60	40-60	40-60	40-60	40-60	40-60	40-60	40-60	40-60
Overall dimensions(main machine) L×W×H(m)	1×0.6× 3.35	6×0.6× 3.35	2×0.70× 3.4	8×0.7× 3.4	6×1× 3.58	8×1× 3.58	12×1.2× 4.1	4×1.2× 4.1	8×1.2× 4.1	8×1.2× 4.1	12×1.2× 4.1	16×1.2× 4.1	18×1.2× 4.1
Occupied area(m²)	18	40	25	56	56	74	96	50	70	82	140	225	268

Note:1.The feeding way has:1>.star feeding 2>.combining star feeding air conveyor 3>.belt conveying 4>.decided by customer
2.Automatic production can be realized.3.Besides the model above mentioned,the special model can also be designed and manufactured as request.4.According different raw material,the power of fan will be differ.
Pictures:

Forward

Related products