Complaint
MMT-SCR series DC motor controllers are full-wave positive feedback motor controllers and can control motors in bi-directional mode. It provides four-quadrant operation, which can realize positive and reverse torque in two speed directions.
1. Applicable to permanent-magnet, separate excitation DC motor |
| 2. Large torque for low-speed start-up. |
3. The mechanical characteristics of hardness, static error rate of 1%. |
| 4. A wide speed-regulating range (0 - max). |
| 5. A rapid dynamic response process.(adjustable) |
| 6. Automatic and smooth transition process during acceleration or deceleration. |
| 7. Current setting and current limiting protection (If the preset current value is exceeded, the driver stops output automatically.) |
| 8. Setting functions of positive and opposite soft start/soft stop time (adjustable) |
| 9. ENABLE lock-up function. |
| 10. Positive rotation and reverse rotation are selectable. |
| 11. Dual closed loop PI adjustment (Current and Voltage),The closed-loop feedback is selectable. |
12. The speed control mode and torque control mode are selectable. |
13. The inertial gliding stop and braking stop are selectable. |
| 14. The input voltage and output voltage are selectable. |
| Specification for 115/230RT10AL | |
| Input voltage range | AC110V /220V for your choice |
| Output current | 1.7A 2.5A 5.0A 7.5A 10A adjustable |
| Output voltage | DC 0-90V(input AC110V) DC 0-90V 0-180V(input AC220V) |
| Operating mode | Speed mode, Torque mode |
| Control ways | 0-±12V, Potentiometer |
| Protection | Abnormalitise like over current, overheating, over voltage, less voltage and short circuit will start the protection function. |
| Temperature protection | When the temperature is 70ºC, the controller will reduce output by overheating protection and stop output. |
| Working Temperature | -10ºC -- +60ºC |
| Ambient humidity | Relative humidity less than 80RH |
| Size | L*W*H = 123*134*83 mm |
| Weight | 1250g |
