PHILIPS MP70 Touch Screen ELO Part NO.D60370-000
PHILIPS MP70 Patient Monitor LCD Touch Screen ELO NO.D60370-000
PHILIPS MP70 touch screen ELO part NO.D60370-000 is the part on the front display screen of MP70 patient monitor, which is a glass touch screen of the display screen. Comes with a cable that connects to the main screen of the display, which can be used to connect the main screen of the MP70 patient monitor for normal use. This touch screen is a 15-inch color LCD, Up to eight waves can be shown on the screens, as well as the 12-Lead ECG Screen. It has a resolution of "4 hours @ 12 second resolution".
PHILIPS MP70 touch screen is mainly used to display the data information on the MP70 patient monitor. Some main functions will be displayed on the main screen of the MP70 monitor first, and users can select the screen elements they need by touching or buttons. After selecting the function you need, the LCD screen will start to work. It can simultaneously display waveforms of eight vital signs, as well as use a 12-lead ECG. Very powerful.
Integrated Touch Display not functioning :
Symptoms | Possible Causes of Failure | Failure Isolation and Remedy |
Touch Screen not functioning | Flat panel adapter not connected | Check connection from the flat panel adapter to the main board |
Touch controller not connected | Check connection from touch controller to flat panel adapter | |
Touch panel cable not connected | Check connection from touch controller board to touch panel | |
Touchscreen functionality has been permanently disabled | In service mode, select Main Setup -> User Interface and change the "Touch Enable" selection to "yes". | |
Touchscreen functionality has been temporarily disabled | Check if touchscreen functioanlity has been temporarily disabled (padlock symbol on Main Screen key). If yes, press and hold the Main Screen key to re-enable touchscreen operation. | |
Main board defective | Replace main board | |
Touch controller board or touch sensor defective | Replace touch controller board and touch sensor Note: Linearization data must be loaded and recalibrated after replacing the touch controller board | |
Touch Position invalid | Touch not calibrated | Perform touch calibration : 1. Enter the Main Setup Menu 2. Select Hardware 3. Select Touch Driver Settings 4. Select Calibrate |
Thank you for your time, if you are interested in PHILIPS MP70 Patient Monitor LCD Touch Screen ELO NO.D60370-000, please feel free to contact us.