Complaint
HS-180 Highshine Injection Molding Machines
READY STOCK
Contact: Kevin Zhou
Highshine Plastic Injection Molding Machine
Model: HS-180
| Machine Moder | Unit | HS-180 |
| Injection Unit | ||
| Screw Diameter | mm | 45 |
| Screw L/D Ratio | L/D | 21.6 |
| Theoretical Shot Volume | cm3 | 357 |
| Shot Weight | g | 325 |
| Injection Pressure | Mpa | 1798 |
| Screw Speed | rpm | 185 |
| Clamping Unit | ||
| Clamping Force | KN | 1800 |
| Clamping Stroke | mm | 435 |
| Space Between Tie Bar(W×H) | mm | 530x470 |
| Ejector Stroke | mm | 140 |
| Ejector Force | KN | 45 |
| Pump Pressure | KW | 16 |
| Pump Motor | KW | 18.5 |
| Heating Capacity | KW | 13.5 |
| Oil Tank Capacity | L | 250 |
| Machine Weight | T | 5.4 |
| Machine Dimensions | mxmxm | 4.95x1.34x1.7 |
Machine structure is designed according to Ergonomics; the operation is more user friendly.
New design improve the stiffness of structure.
With hollow frame, suitable forfully automatic production system with 3-conveyers
Transparent front operation door, easy to watch the work of machine
Twin-carriage structure, better alignment and smoother injection
Standard Configuration:
PLC/Computer: Techmation Q12
Hydraulic Pump: Sumitomo
Servo Motor: Yunsheng
Hydraulic Valve: Yuken
Relief Valve: Yuken
Servo Driver: Delta
Electronic Transducer: Opkon
FAQ
1.How to choose injection molding machine?
The injection weight should be about 1.2× product's weight; The tie bar space should be bigger than the mold dimension; Contact with us for more information.
2.How to pay?
30% deposit T/T in advance, the balance 70% payment by T/T before shipment.
3.Is that possible for your company to send engineer to install machine for commissioning, even train our workers?
Yes, we can send our engineer to your factory for installing, commissioning, training. We have some engineers flying among different countries for after sale service and technical support. As per experience, if everything OK usually 5-15 days is enough. Therefore, before shipment, we need you to prepare invitation letter for visa. However, please be noted that all cost happened for visa, travel, hotel should be paid in advance by customers. In addition, we cannot guarantee each visa is successful.
4.If we buy your machines, is there any warranty?
Yes, definitely. 1 year after shipment for mechanical parts, hydraulic parts, electric components (The Screw just has 6-months)
