Cy01 + Cyt6 315 433.92 MHz PCB Circuit RF Receiver Transmitter Module

Min.Order: 1,000
Product origin: Shenzhen, Guangdong, China
Infringement complaint: complaintComplaint
US$ 1.1 ~ 1.3

Description
CYT6 Transmitter Module:

Features:
  1. The range can be 500m when matching with CY11
  2. Operation voltage: VCC= 2.6 to 12V;
  3. Frequency: 315MHz/433.92MHz(custom frequency is available);
  4. High output power: 12dBm;
  5. Frequency tolerance: ±75 KHz;
  6. Current: 12mA;
  7. Operating temperature: -20ºC~+70ºC
  8. Bit rate: <4.8kbps;


Application
  1. Car Security System
  2. Remote Keyless Entry
  3. Garage Door Controller
  4. Home Security
  5. Wireless Mouse
  6. Automation System


Pin Description

Pin-out as showed in figure 1 above
PinNameFunction
1GND Connect to negative power supply
2DATAData connected to MCU
3VDDPositive Power Supply
4ANTAntenna Out


Note 1: ANT pin is a 50 ohm antenna input. The length is about: 
23cm for 315MHz
17cm for 433.92MHz


Electrical Characteristics:

Condition: Ta=25ºC Vcc=5.0V
CharacteristicsSymbolConditionValueUnit
Min.Typ.Max.
FrequencyFc  315/433.92 MHz
Modulation Mode  ASK/OOK 
Output power 5V/50Ω 12 dBm
Data-rate   1.2 Kbps
Frequency TolerateFc  ±75 kHz
CurrentIRC   12mA
Working VoltageVCC 2.6 12V
Working TemperatureTC -20 +70ºC



Mechanical Size: (Unit: MM)


CY01 Receiver Module:

Features:
  1. Frequency: 315M/433.92MHz (custom frequency is available)
  2. Low power consumption and low cost
  3. Higher stability (no adjust components) & coherence
  4. Very low RF re-radiation at the antenna;
  5. Higher sensitivity: -107dBm
  6. Operation temperature: -20ºC ~70ºC ( It can custom to -40ºC ~ 85ºC upon requests)
  7. Supply voltage: 3.0 ~ 5.5V
  8. Low current: 2.8mA(5V, 315MHz)
  9. Be compatible with most (ASK/OOK) transmitters


Application
  1. Smart home system
  2. Remote controls
  3. Remote fan and light control
  4. Garage door and gate openers
  5. Alarm and security system


Pin Description

Pin-out as showed in figure 1 above
Pin NamePin Definition
ANTRF signal input pin, connect antenna outside(Note1)
GNDConnect to negative power supply
GNDConnect to negative power supply
VDDConnect to positive power supply
VDDConnect to positive power supply
NCNo connect
DATAData output pin, connect to MCU or decoder's input pin
GNDConnect to negative power supply

Note 1: ANT pin is a 50 ohm antenna input. The length is about: 
23cm for 315MHz
17cm for 433.92MHz



Electrical Characteristics:
Condition: Ta=25ºC Vcc=5.0V Frequency=315MHz
ParameterSpecificationUnitCondition
Min.Typ.Max.
Frequency Range 315 MHzOther freq. available
Receiver Sensitivity -107 dBmBER=10E-2
Data Rate0.582.44.8KbpsManchester code
Supply Voltage, VDD3.05.05.5VDC
Current2.8  mADC
Operating Temperature-20 70ºC 

Condition: Ta=25ºC Vcc=5.0V Frequency=433.92MHz
ParameterSpecificationUnitCondition
Min.Typ.Max.
Frequency Range 433.92 MHzOther freq. available
Receiver Sensitivity -107 dBmBER=10E-2
Data Rate0.582.44.8KBaudManchester code
Supply Voltage, VDD3.05.05.5VDC
Current4.0  mADC
Operating Temperature-20 70ºC 


Mechanical Size: (Unit: MM)





Product Tag:
Related categories:
Scroll to Top