Complaint
| Model | H6014L-D | ||
| Table Travel (X axis) | mm | 6000 | |
| Headstock Travel (Y axis, 4 axes) | mm | 1400 | |
| Sliding Saddle (Z axis, 5 axis) | mm | 800 | |
| Distance from the center of the spindle (the lowest point of the Y-axis) to the table surface, (2 axis symmetry) | mm | 150 | |
| Minimum distance from the center face of the spindle (without tool) to the center of the worktable, (2 axis symmetry) | mm | 250 Bi-directional (500) | |
| Maximum distance from the center face of the spindle (without tool) to the center of the worktable, (2 axis symmetry) | mm | 1050 Bi-directional (2100) | |
| Table Size | mm | 6000*1200 | |
| Table Load | kg | 4000 | |
| T-Slot Size | Mm x spacing | 22*200 | |
| Spindle Taper | BT50 | ||
| Install Diameter | mm | Φ190 | |
| Pull Stud | BT50 45° | ||
| Rotation speed | rpm | 50-4000 (16 grades) | |
| Spindle output maximum motor power | kw | 18.5 | |
| Maximum motor torque of spindle | n.m | 354 | |
| Motor Power | kw | 6/3/3/3/3 | |
| Cutting feed | m/min | 6 | |
| X/Y1/Y2/Z1/Z2 move speed | m/min | 8/12/12/10/10 | |
| Positioning accuracy (X/Y1/Y2/Z1/Z2) | mm | X axis ≤0.04, YZ axis ≤0.02 | |
| Repeat Positioning accuracy (X/Y1/Y2/Z1/Z2) | mm | X axis ≤0.03, YZ axis ≤0.015 | |
| Center concentricity of two spindles | mm | ≤0.04 | |
| Control System | FANUC | ||
