Description
ISO Standard heat resistant conveyor belt manufacturer HUAYUE® Heat resistant Conveyor Belt used by the multi-layer polyester (or to the polyester, polyester weft for amine) bond canvas with a certain way, up and down the high-strength plastic cover, good wear-resistant flexible rubber.
Ply: 1-10
Top Rubber Cover: 1.5-10mm
Bottom Rubber Cover: 1.5-10mm
Belt Width:100-2200mm
Color: Black
Edge:Mould Edge or Cut Edge
CASTING PLY MATERIAL: NN(NYLON), EP(POLYESTER), CC(COTTON), ST (Steel cord) FOR SELCETION.
Advantage:
1. Natural rubber Thin belt body with high strength, light weight.
2. Anti-abrasive, impact resistant, corrosion resistant
3. Softy belt body, good flexibility, excellent trough.
4. Vulcanization molding
5. Long service life
Characteristics:
1.Good elasticity, anti-shock, anti-abrasive
2.High adhesion, good flexibility and trough ability;
3.Better stability of size and heat-resistance
4.Good water-proof ability, little change in strength under dry or wet conditions
HUAYUE conveyor belt has over 10 key types according to the use classification:- Flat normal type
- Chevron Pattern type
- V-belt pattern type
- Nylon casing ply type
- Heat /cold resistant type
- Oil resistant type
- Flame resistant type ( self- extinguishing type)
- Chemical resistant type
- Anti shock type
- Anti-abrasive type
HUAYUE® conveyor belts carry out a wide range of conveyor tasks in all industries. It has been over 30 years history since 1986. Passed SGS, BV, ISO. Honored CHINA FAMOUS BRAND in 2014.
Standards | Cover Rubber | Adhesion |
Tensile Strength | Elongation at break | Abrasion | Cover to Ply | Cover to Ply |
DIN 22102 | Mpa | % | mm3 | N/mm | N/mm |
(<=1.5mm) | (>1.5mm) |
DIN 22102-Z | 15 | 350 | 250 | 3.5 | 4.5 |
DIN 22102-W | 18 | 400 | 90 | 3.5 | 4.5 |
DIN 22102-Y | 20 | 400 | 150 | 3.5 | 4.5 |
DIN 22102-X | 25 | 450 | 120 | 3.5 | 4.5 |
Standards | Cover Rubber | Adhesion |
Tensile StrengTD | Elongation at break | Abrasion | Cover to Ply | Cover to Ply | Ply to Ply |
AS 1332 | Mpa | % | mm3 | N/mm | N/mm | N/mm |
(<=1.9mm) | (>1.9mm) |
AS 1332-N17 | 17 | 400 | 200 | 4 | 4.8 | 6 |
AS 1332-M24 | 24 | 450 | 125 | 4 | 4.8 | 6 |
Standards | Cover Rubber | Adhesion |
Tensile StrengTD | Elongation at break | Abrasion | Cover to Ply | Cover to Ply | Ply to Ply |
RMA | Mpa | % | mm3 | N/mm | N/mm | N/mm |
(<=1.6mm) | (>1.6mm) |
RMA-I | 17 | 400 | | 3 | 4.4 | 4 |
RMA-II | 14 | 400 | | 3 | 4.4 | 4 |
Standards | Cover Rubber | Adhesion |
Tensile StrengTD | Elongation at break | Abrasion | Cover to Ply | Cover to Ply | Ply to Ply |
SANS 1173 | Mpa | % | mm3 | N/mm | N/mm |
A | 18 | 400 | 70 | 5 | 7 |
C | 20 | 400 | 150 | 5 | 7 |
M | 25 | 450 | 120 | 5 | 7 |
N | 17 | 400 | 150 | 5 | 7 |