1.Material:reinforced nylon. It can stand with high pressure and has good tensile strength,toughness and elasticity ,wearing and falmable resisance. 2.Resistances:It is oil and acceleration is 5m/sec.(specfic speed and acceleration depends on specific). 3.Service life:Under normal conmal condition,5 million reciprocating motions can be reached(which is also related to the operating conditions.) Technical data:
Tensile strength
180N/mm2
Volume resistance
1010-1015
Impact strength
50Kj/m2
Water Absorption
4%
Tenprature range
-40.C-130.C
Friction factor
0.3
Surface resistaned
1010-1012
Falme resistance
HB(UL49)
Product details
Application The Engineering Plastic Roller Chain Cable Drag Chain has been widely used in CNC machine tools, electronic equipment, stone machinery, glass machinery, doors and windows machines, injection molding machines, mechanical hands, overweight transportation equipment, automated warehouses.
Installation 1.Put a screw driver vertically into the opening hole at both ends of the cover and then open the cover .Put the drag chain for cables and oip pipes according to the instructions provided .Put the cover back.Note that the fixed end and the moving end of a cable should be fixed by using a tension device 2.When used in a long sliding service,it is recommended to use a guiding grove,Please ask our technical personnel about the usage of the guiding grove.
Order notice Kindly please advise the below: 1. Length: 2. Cable or pipe Max. Dia.: 3. Supporting board type: 4. Bending Radius(or the curved height ):