Complaint
| Factory Direct |
| For Plastics, metal, wood, rubber, paper, and leather.And other requirements |
| Fast curing speed, 1 to 3 seconds for the first time curing, 15 seconds for all curing |
| The viscosity, high strength, and high strength of the adhesive is suitable for various purposes. |
Item No. | HCP-106 | |
Chemical Composition: | One part cyanoacrylate | |
Appearance | Liquid | |
Color: | Clear | |
Application temperature | Room temperature | |
Service Temperature | -65°F to 180°F (-54 to 82°C) | |
Set Time: | 10-30s | |
Full Strength: | 24 hours | |
Shelf life | 2 years | |
Packing | 20g*1pcs/card 12cards/box | |
GW | 6.8kgs | |
CTN | 40*34*38cm | |
| 1. Use a dry cloth or paper make surface dust, oil agent, and steel embroidery removed |
| 2. Open the front cover, and with the flick of a fingertip part, so there is no residual liquid, and then attached to the needle poke open the cavity |
| 3. On the face, drop a little agent, then immediately, and keep hardening, hardening time is a few seconds to a few minutes; about 30 minutes to reach the practical strength, 1-2 hours after the highest strength |
| 4. After use wipe the container tip, and the lid. |
Application
Company Profile
