Description
100W dinrail switching power supply
Universal AC input/full range
Protections: Short circuit/over load/over voltage
Cooling by free air convection
Can be installed on DIN-Rail: TS-35/7.5 or TS-35/15
Built in DC OK active signal
LED indicator for power on
No load power consumption<0.75W
100% full load burn-in test
2 year warranty
| Model |
| MDR-100-5 | MDR-100-12 | MDR-100-24 | MDR-100-48 |
| Output | DC output Voltage | 5V | 12V | 24V | 48V |
| Voltage tolerance | ±1.0% | ±1.0% | ±1.0% | ±1.0% |
| Rated Current | 12A | 7.5A | 4A | 2A |
| Related Power | 60w | 90w | 96w | 96w |
| Wave&Noise | 80mVp-p | 120mVp-p | 150mVp-p | 150mVp-p |
| Voltage ADJ range | 5-6V | 12-15V | 24-30V | 48-56V |
| Set up,rise time | 3000ms 50ms/230VAC 3000ms,50ms/115VAC at full load |
| hold up time | 120ms/230VAC 25ms/115VAC at full load |
| Input | Voltage Range | 85 ~ 264VAC 47-63HZ 120-370VDC |
| Input Current | 1.8A/115VAC 1A/230VAC |
| Efficiency | 78% | 86% | 88%% | 87% |
| AC inrush current | Cold start current 30A/115V 60A/230VAC |
| Leakage current | <1mA/240VAC |
| Protection | Overload | Above 105% rated output power |
| hiccup mode, recovery automatically after fault condistion is removed |
| Over voltage | 6.25-7.25V | 15.6-18V | 31.6-36V | 57.6-64.8V |
| Shut down o/p voltage, re-power on to recover |
| Function | DC OK active single | Relay contact rating(max) :30V/1A resistive |
| Environment | Working temp humidity | -20~+70°C 20%~90%RH |
| Stor temp, humidity | -20~+85°C 20%~90%RH Non-condensing |
| Safety | safety standards | UL508,TUV EN60950-1 approved |
| Withstand voltage | I/P-O/P:3KVAC I/P-FG:2KVA O/P-FG:0.5KVA |
| Isolation resistance | I/P-O/P,I/P-FG,O/P-FG:100M Ohms/500VDC/25 /70%RH |
| EMC emission | Compliance to EN55011,EN55022,EN61204-3 class B,EN61000-3-2,-3 |
| Size | size | 55*90*100mm (W*H*D) |
| Package | 0.42kg,30pcs/15kg |
| Note:1.All parameters not specially mentioned are measured at 230VAC input, related load and 25 f ambient temperature.2.Wave&noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&47uf parallel capacitor.3.Tolerance: includes set up tolerance, line regulation and load regulation. |
Complaint
