Temperature and Time Controller with One Group Alarm (XMTF-918T)

I.Survey
XMT*-918T series intellectual ability temperature regulator series controlled by single chip, free input multi-signals of thermocouple, ON/OFF control and PID control, besides, it has time function, you can adjust time unit hour and minute or minute and second. They are widely used in the automatic control system of the temperature, chemical, ceramics, light, metal, petrochemical and heat treatment industry.

II .Main technical specification
1. Basic deviation: ± 0.5%F. S± 1
2. Cold end compensating deviation: ≤ ± 2.0
3. Sampling cycle: 0.5s
4. Time range: 1S~59.59H
5. Time precision: Class 0.005
6. Control cycle: Relay output 2~120s and can be adjusted
7. Relay output contact capacity: AC220V/5A(resistance load)
8. Power: AC85V~242V(switching supply), 50/60Hz, or the other special request.
9. Working condition: Temperature 0~50.0, relative humidity≤ 85% RH, without corrode and strong electric radiation
10: The surface dimension (mm) 96× 48× 110 Installation hole 92× 44




Time function selection:
1:start timing when it reaches the temperature,and the built-in buzzer will give an alarm output after reaching the time, the controller keep on heating;
2:start timing when it reaches the temperature,and the built-in buzzer will give an alarm output after reaching the time, the controller stop heating;
3:regular temperature control(no alarm)+time relay function:start timing when the power is on, alarm relay attracting after reaching the time .




Product code:
          XMT  --   9    --     8     -- 
                  (1)  (2)  (3)   (4)   (5) 
(1) Meter faceplate dimension(mm):
      Overall size          Installation hole       Overall size             Installation hole
Blank: 160 × 80 x 120     152x 76                        A: 96 x 9 x 110         92 x 92
      D: 72 x 72 x 110         68 x 68                        E: 48 x 96 x 110       44 x 92    
      F: 96x 48 x 110          92 x 44                        S: 80 x 160 x 120     76 x 156
      G: 48 x 48 x 110        44 x 44
(2)Design serial number
(3)Alarm :"0":no set alarm
                 "1or2": one alarm (Optional alarm mode, please refer to the parameter "ALP")          
                  "5": voice alarm  
                  "3":two group alarm (Optional alarm mode, please refer to the parameter "ALP")
(4)Input signal: "8":Free exchange of the input signal
(5)Suffix:
Blank:Relay contact       
  " A":Single-phase over-zero trigger adjustment
 " A3":Three-phase over-zero trigger adjustment   
 " B": Single-phase shift-phase trigger adjustment
" B3":Three-phase shift-phase trigger adjustment   
  "G":solid relay output
 "C":0~10mA or 4~20mA constant electric current output
  "Wt":with micro-printer output signal
 "K":with RS485 or RS232 communication module interface(MODBUS RTU) 
 ''T'': time control   




Panel and connection scheme description(consult)






Flow chart




Certificate

Packaging Details